Comfort Home Automation/ Security System Forums Home
Home Search search Menu menu Not logged in - Login | Register
Comfort Home Automation/ Security System Forums > Products > Door Stations > DS01/DS02 Mic cannot be heard on the keypad

DS01/DS02 Mic cannot be heard on the keypad
 Moderated by: admin
 New Topic   Reply   Printer Friendly 
 Rate Topic 
AuthorPost
 Posted: Saturday Mar 21st, 2015 07:37 am
   PM  Quote  Reply 
1st Post
slychiu
Administrator


Joined: Saturday Apr 29th, 2006
Location: Singapore
Posts: 5172
Status: 
Offline

  back to top

If the Door station Mic using DS01 or DS02 cannot be heard on the keypad, but the keypad mic can be heard on the door station, please check the shunt J6 on the DM02
The shunt should be inserted on J6. The location of J6 is shown below
Note that older versions of the DM02 do not have the J6 shunt. J6 is unshunted for certain models of 3rd party door station but most need to have J6 shunted

J6 shunt should be removed for DP03X, inserted for DS01/DS02

J5 Shunt should be connected on DP03X and removed for DS01/DS02

Attachment: dm02-j6.jpg (Downloaded 49 times)

Last edited on Wednesday Jan 6th, 2016 03:01 pm by slychiu



 Posted: Thursday May 21st, 2015 01:18 pm
   PM  Quote  Reply 
2nd Post
slychiu
Administrator


Joined: Saturday Apr 29th, 2006
Location: Singapore
Posts: 5172
Status: 
Offline

  back to top

The problem where Door Station microphone  cannot be heard on the Keypad but Keypad microphone can be heard on the Door Station can also be due to the Tuning Parameters

Tuning Parameter 81 (AFE DP MIC GAIN KP-DP INTERCOM) was normally 3, it should be increased to 6. This increases  the volume from DP Mic to Keypad






The default templates have also been updated to include this change

To Update the default templates, open Comfigurator, go to File Menu >> Update Defaults


Last edited on Wednesday Jan 6th, 2016 03:08 pm by slychiu



 Posted: Saturday May 23rd, 2015 10:32 am
   PM  Quote  Reply 
3rd Post
slychiu
Administrator


Joined: Saturday Apr 29th, 2006
Location: Singapore
Posts: 5172
Status: 
Offline

  back to top

Tuning Parameter 81 (AFE DP MIC GAIN KP-DP INTERCOM)  is the  volume from DP Mic to Keypad.  Preferred value = 6 for DS01


Tuning Parameter 79 (AFE KP MIC GAIN KP-DP INTERCOM)  is the volume from KP Mic to Door station. Preferred value = 10 for DS01

Increase the appropriate parameter to increase the volume of each direction. However too much increase in volume may cause howling. Settle on a value which results in audible volume in each direction without howling

Reset is not necessary after changing and write selective




 Current time is 12:04 pm
Comfort Home Automation/ Security System Forums > Products > Door Stations > DS01/DS02 Mic cannot be heard on the keypad
Top




UltraBB 1.172 Copyright © 2007-2014 Data 1 Systems