Comfort  Automation/ Security System Forums Home
Home Search search Menu menu Not logged in - Login | Register

Upgrading ETH03 firmware using TFTP
 Moderated by: ident
 New Topic   Reply   Printer Friendly 
 Rate Topic 
AuthorPost
 Posted: Friday Apr 1st, 2016 01:17 pm
   PM  Quote  Reply 
1st Post
slychiu
Administrator


Joined: Saturday Apr 29th, 2006
Location: Singapore
Posts: 5493
Status: 
Offline

  back to top

if CS Manager cannot be used for upgrading ETH03 due to not being able to find it or any exception, you can use the TFTP  command to upgrade the fiirmware instead

Run the dos command, ie Start button and type cmd in the window
In the Dos window, type

tftp (ip address) "(path to hex file)"

eg
tftp 192.168.1.2 put "C:\download\ETH03_general_2_20.hex"



Note that the TFTP service is normally disabled in Windows, 7 onwards. To enable it, go to Control Panel in Windows, select Programs ad Features, find "Turn on or off Windows Features" on the left, and check the box for  "TFTP Client"

see screenshot





 Current time is 06:19 am
Top




UltraBB 1.172 Copyright © 2007-2014 Data 1 Systems