Comfort  Automation/ Security System Forums Home
Home Search search Menu menu Not logged in - Login | Register
Comfort Automation/ Security System Forums > Support > FAQs - Technical > Alarm Siren off while dialing to Monitoring Station

Alarm Siren off while dialing to Monitoring Station
 Moderated by: admin
 New Topic   Reply   Printer Friendly 
 Rate Topic 
AuthorPost
 Posted: Monday May 16th, 2016 06:59 am
   PM  Quote  Reply 
1st Post
evard
Member
 

Joined: Monday Sep 2nd, 2013
Location:  
Posts: 23
Status: 
Offline

  back to top

Hi Expert,
We have an issue here when dialing to monitoring station, the alarm siren will off for 20 - 30 seconds, then back to on. In this moment, the keypad is hang and not accepting any command until the dialing completed.
When there is no dialing, the alarm siren works correctly. 
*The dialing is going through the community intercom line [using fiber]
Is there anything I can set to solve it? Or this issue is related to the fiber?
Thank you!



 Posted: Monday May 16th, 2016 11:50 am
   PM  Quote  Reply 
2nd Post
slychiu
Administrator


Joined: Saturday Apr 29th, 2006
Location: Singapore
Posts: 5493
Status: 
Offline

  back to top

The siren turning off while dialing to CMS is correct only for a few seconds while the dialing is going on
There is a possibiity that the electrical noise from the siren can affect the CMS transmission so the siren is turned off temporarily
The keypad is not affected, it does not hang. Please test again




 Current time is 11:50 pm
Comfort Automation/ Security System Forums > Support > FAQs - Technical > Alarm Siren off while dialing to Monitoring Station
Top




UltraBB 1.172 Copyright © 2007-2014 Data 1 Systems