Comfort Home Automation/ Security System Forums Home
Home Search search Menu menu Not logged in - Login | Register

New Logic Engine LGX01
 Moderated by: ident, hendy
 New Topic   Reply   Printer Friendly 
 Rate Topic 
AuthorPost
 Posted: Sunday Sep 11th, 2016 10:57 am
   PM  Quote  Reply 
1st Post
slychiu
Administrator


Joined: Saturday Apr 29th, 2006
Location: Singapore
Posts: 3822
Status: 
Offline

  back to top

Cytech's new version of the Logic Engine, LGX01 has a plug in connector for ETH03 Ethernet interface or USB01 USB Interface which acts as a UCM so another UCM is not necessary. This replaces the part number CM9000-LOG

LGX01 is a Programmable Controller for Automation Applications which can replace PLCs and with the ability to interface to most  Home automation Systems including Cytech's IRIO


LGX01 with ETH03 submodule


LGX01 PCB without submodule

Features
  • 8 inputs, 8 open-collector outputs, expandable to 216 Inputs and 216 outputs
  • 12V - 1Amp wall mount adaptor included
  • Plug in 10 way connector for ETH03 submodule. This acts like a UCM General, for use with Comfigurator and iOS/Android apps or ComfortClient. Submodule is ordered separately.
  • 32 Time Programs
  • 1024 Responses
  • Sunrise/Sunset Times with automatic daylight saving time changes
  • Able to send 250 IR Codes to AV and airconditioners
  • Works with all the UCM Interfaces, eg KNX, C-Bus, Ethernet, USB Universal, Z-Wave etc
  • Programmable via the  ETH03 plugin submodule with Comfigurator
  • PCB only. EN01 or EN03 enclosures are available
Applications
  • Central Controller for AV, Lighting, Blinds, Heating, Airconditioning, Irrigation etc with Scheduling and logic condtitions (If/Then/Else)
  • Interface to UCM/Universal,  C-Bus, KNX, Z-Wave, Velbus, GSM, Modbus etc
  • Interface between 2 systems eg Zwave to KNX etc
  • iPhone app to control and monitor system
  • Control on/off lighting via two way switches with TWS ( with relay and current sensor)
  • Control airconditioning  and AV equipment via IR signals (250 codes)
Options/Expansions
  • Up to 8  UCMs (eg RS232, USB, Ethernet, Cbus, KNX, Zwave, Velbus, Universal, GSM, Modbus)
  • Up to 8 IRIO
  • Expandable to 96 Inputs/outputs using LEM and SEM, and a further 120 I/O using RIO
This is essentially a Comfort PCB without the alarm, dialer, voice, recording, intercom functions.
Logic Engine Differences with Comfort
  1. It  is NOT an alarm system. Inputs trigger Responses, do not activate alarms.
  2. It is not connected to the phone line and does not auto-answer calls or dial to phones
  3. Does not have  a voice menu or  make announcements
  4. No  Message recording and Playback
  5. No Intercom Functions
  6. No battery charger, does not need backup battery
Part Numbers
  1. LGX01 Logic Engine PCB with 12V 1A universal wallmount  power supply without enclosure
Link to Cytech Products Page http://www.cytech.biz/logic_engine_controller_pcb.html

Link to LGX01 Manual (In Downloadable Files) http://www.cytech.biz/logic_engine_controller_pcb.html

The UCM/Logic is a low cost controller without Inputs and Outputs  but otherwise with the same features as LGX01 http://www.comfortforums.com/forum117/4459.html

Last edited on Sunday Apr 2nd, 2017 02:23 am by slychiu



 Current time is 12:52 pm
Top




UltraBB 1.172 Copyright © 2007-2014 Data 1 Systems