Comfort Home Automation/ Security System Forums Home
Home Search search Menu menu Not logged in - Login | Register

Slave Firmware 7.118
 Moderated by: ident
 New Topic   Reply   Printer Friendly 
 Rate Topic 
AuthorPost
 Posted: Tuesday Nov 22nd, 2016 04:33 am
   PM  Quote  Reply 
1st Post
slychiu
Administrator


Joined: Saturday Apr 29th, 2006
Location: Singapore
Posts: 3845
Status: 
Offline

  back to top

Bugs Fixed
  1. Fixed bug Sem sent ack 4DH to Comfort which is  only used buy KP LCD and caused problems

Changes
  1. Auto Detect LEM03 on SEM. LEM03 can be connected to the last SEM in the system
  2. Suppprt EL EOL query command. Supports soft eol feature
  3. Accept single message from Comfort with 31 zone types at reset
  4. Support ID Button (future)
  5. Handle rs485 comms status 92H message

Last edited on Monday Apr 17th, 2017 12:21 pm by slychiu



 Posted: Friday Apr 14th, 2017 11:15 am
   PM  Quote  Reply 
2nd Post
cc_uk
Member
 

Joined: Friday Mar 28th, 2014
Location:  
Posts: 61
Status: 
Offline

  back to top

This version has been marked beta for a long time now - it is it likely to be released soon?

I note reference to soft EOL - I assume for a future version of hardware?

I thought a LEM03 wasn't supported when a SEP/SEM was in use on the system?



 Posted: Saturday Apr 15th, 2017 03:59 am
   PM  Quote  Reply 
3rd Post
slychiu
Administrator


Joined: Saturday Apr 29th, 2006
Location: Singapore
Posts: 3845
Status: 
Offline

  back to top

Thanks for the reminder. Yes it should be released soon

This will allow Slaves to support LRM03, so you could have

Comfort + LEM01   Zones 1 to 16
SEM  #1 + LEM01   Zones 17 to 32
SEM #2 + LEM03    Zones 33 to 56

There should be no more Slaves after the LEM03

Hence if you had a Comfort with LEM03 and you want to add more zones, you can still use the LEM03

Yes the Soft EOL is for a future hardware where the zone shunts are eliminated






 Posted: Saturday Apr 15th, 2017 11:27 am
   PM  Quote  Reply 
4th Post
cc_uk
Member
 

Joined: Friday Mar 28th, 2014
Location:  
Posts: 61
Status: 
Offline

  back to top

That's great that a LEM03 could run off a SEM. Presumably though not if there are the full three SEMs on the system?



 Posted: Sunday Apr 16th, 2017 02:48 am
   PM  Quote  Reply 
5th Post
slychiu
Administrator


Joined: Saturday Apr 29th, 2006
Location: Singapore
Posts: 3845
Status: 
Offline

  back to top

There should only be 1 LEM03, attached to the last SEM in the system, or to Comfort if there are no SEMs



 Posted: Monday Apr 17th, 2017 03:12 am
   PM  Quote  Reply 
6th Post
slychiu
Administrator


Joined: Saturday Apr 29th, 2006
Location: Singapore
Posts: 3845
Status: 
Offline

  back to top

LEM03 cannot bre connected if there are 5 SEMs in the system as that would edxceed the maximum 96 zones



 Posted: Monday Apr 17th, 2017 12:22 pm
   PM  Quote  Reply 
7th Post
slychiu
Administrator


Joined: Saturday Apr 29th, 2006
Location: Singapore
Posts: 3845
Status: 
Offline

  back to top

SEM 7.118 firmware has been released

LEM03 can now be connected to the last SEM in the system.
Previously LEM03 could only be connected to Comfort if there are no SEMs in the system


see topic http://comfortforums.com/forum91/2069.html for LEM03 zone numbering system

Last edited on Monday Apr 17th, 2017 12:45 pm by slychiu



 Current time is 11:15 am
Top




UltraBB 1.172 Copyright © 2007-2014 Data 1 Systems