Comfort  Automation/ Security System Forums Home
Home Search search Menu menu Not logged in - Login | Register

Entry Door vs Entry Path
 Moderated by: slychiu
 New Topic   Reply   Printer Friendly 
 Rate Topic 
AuthorPost
 Posted: Tuesday Mar 28th, 2017 06:20 am
   PM  Quote  Reply 
1st Post
slychiu
Administrator


Joined: Saturday Apr 29th, 2006
Location: Singapore
Posts: 5493
Status: 
Offline

  back to top

An Entry Door is a Zone Type that you assign to the Front and Back doors or other doors that are used for entry and exit to the property
When leaving the property the occupant must exit through the Entry Door in order to Arm the system to Away Mode. (Leaving the house is not necessary in Night or Day Modes)
When the system is armed, opening the Entry Door will cause an Entry Alert to start - this is the delay to disarm the system by the keypad, before the Intruder Alarm is activated

An Entry Path is a property (checkbox) on a Zone, it is not a Zone Type. An Entry Path is normally a PIR (motion sensor) which is in the same area as the Entry door, which the user must cross while entering and exiting the property. The Entry Path is normally a PIR Away or PIR Away/Night zone Type or Alert Zone Type.

When entering the house, an entry Path zone will not cause an Alarm if the Entry door is opened first. If an Entry Path zone is detected without an Entry door open first, there will be an immediate alarm.




 Current time is 10:05 pm
Top




UltraBB 1.172 Copyright © 2007-2014 Data 1 Systems