Comfort Home Automation/ Security System Forums Home
Home Search search Menu menu Not logged in - Login | Register

Arming problems with iphone zone 0 error
 Moderated by: slychiu
 New Topic   Reply   Printer Friendly 
 Rate Topic 
AuthorPost
 Posted: Monday Oct 16th, 2017 12:18 pm
   PM  Quote  Reply 
1st Post
Home
Comfort Distributors
 

Joined: Wednesday Jul 12th, 2006
Location: United Kingdom
Posts: 555
Status: 
Offline

  back to top

We have a system set up which is controlled from the clients iphone and we also have access on android.
The android app arms and disarms OK
The iphone app appears to put the alarm into some setting dilemma. basically it will not arm and comes up with the message "zone 0 error".
All firmware latest
Any thoughts



 Posted: Monday Oct 16th, 2017 12:25 pm
   PM  Quote  Reply 
2nd Post
slychiu
Administrator


Joined: Saturday Apr 29th, 2006
Location: Singapore
Posts: 4028
Status: 
Offline

  back to top

Check if you connection is Remote or Local in Setup


If it is set to Local, it is like local arm and you must exit via the entry door in order to arm. "Arm Failure 0" - 0 refers to the  zone number which caused the arm failure. Zone 0 means no zone was triggered, hence the entry door  was not opened and closed

Set connection to remote so that exit is not needed.l If all zones are closed the system arms - this is the same as Remote arming by phone - no exit needed



 Posted: Monday Oct 16th, 2017 12:48 pm
   PM  Quote  Reply 
3rd Post
Home
Comfort Distributors
 

Joined: Wednesday Jul 12th, 2006
Location: United Kingdom
Posts: 555
Status: 
Offline

  back to top

OK thats a viable explanation Ill check with customer and get him to make sure he is connected remotely.
Would it be possible to add a note to the app so ......
When logged in locally - if arming then text display "Please open close exit door"



 Posted: Tuesday Oct 17th, 2017 03:06 am
   PM  Quote  Reply 
4th Post
slychiu
Administrator


Joined: Saturday Apr 29th, 2006
Location: Singapore
Posts: 4028
Status: 
Offline

  back to top

I would have thought "Please Exit" means to do that?;)



 Current time is 09:02 pm
Top




UltraBB 1.172 Copyright © 2007-2014 Data 1 Systems