Comfort Automation/ Security System Forums Home
Home Search search Menu menu Not logged in - Login | Register
Comfort Automation/ Security System Forums > Support > FAQs - Technical > Tamper does not sound the External Siren when System is Unset

Tamper does not sound the External Siren when System is Unset
 Moderated by: admin
 New Topic   Reply   Printer Friendly 
 Rate Topic 
AuthorPost
 Posted: Wednesday Nov 29th, 2017 08:39 am
   PM  Quote  Reply 
1st Post
slychiu
Administrator


Joined: Saturday Apr 29th, 2006
Location: Singapore
Posts: 5495
Status: 
Offline

  back to top

A Tamper does not sound the External Siren when System is Unset.

EN50131-1 Table 7 does not permit Tamper to sound external bellbox if system is not armed. The tamper alarm is considered an unconfirmed alarm, and can lead to a confirmed alarm if another alarm is activated

This has been implemented since firmware 7.036


 Posted: Saturday Dec 2nd, 2017 08:35 am
   PM  Quote  Reply 
2nd Post
slychiu
Administrator


Joined: Saturday Apr 29th, 2006
Location: Singapore
Posts: 5495
Status: 
Offline

  back to top

I am not sure if this is a good restriction. It is convenient for installers to make changes without causing the bell to sound if tamper is removed.


 Current time is 01:34 pm
Comfort Automation/ Security System Forums > Support > FAQs - Technical > Tamper does not sound the External Siren when System is Unset
 Top

UltraBB 1.172 Copyright © 2007-2014 Data 1 Systems