Comfort  Automation/ Security System Forums Home

 Moderated by: slychiu  
AuthorPost
slychiu
Administrator


Joined: Saturday Apr 29th, 2006
Location: Singapore
Posts: 5493
Status: 
Offline

  back to top

UCM/GSM4 v7.106 beta firmware has the following changes from  7.100;
  1. The Status value in the bottom left of the UCM/GSM screen will show the current GSM signal strength 0 to 4. In previous firmware, the GSM signal strength is displayed only for 1 second after which is followed by Normal/No Error. The status "Normal/No Error" has been removed as it provides no information and prevents the GSM signal strength from being displayed.
  2. The signal strength 0 to 4 is followed by text describing the level number, eg 0 - No Network, 1 - Weak, 2 - Fair, 3- Good, 4 - Strong. This is not done by firmware, it is in Comfigurair defaults. To update the defaults, go to file > Update Defaults in Comfigurator. This updates the defaults. Close and restart comfigurator to activate the new defaults

slychiu
Administrator


Joined: Saturday Apr 29th, 2006
Location: Singapore
Posts: 5493
Status: 
Offline

  back to top

UCM/GSM4 v7.106 has been released.
To upgrade right click on UCM/GSM4 in Modules and select "Check for Upgrades"


UltraBB 1.172 Copyright © 2007-2014 Data 1 Systems