Moderated by: slychiu, mattbrain, benstinton |
Author | Post | |||||||||
---|---|---|---|---|---|---|---|---|---|---|
Swiss-Toni UCM Pi Users
|
I am just toying with an idea and wondered if you have come across anything similar. I am looking at using micro sensor (undecided which ones I will use) on metal railing gates for pathway and drive way which would be direcly connected to comfort zones covering two purposes, firstly to act as a perimeter warning and secondly to control front area lighting. My question is what sequence would you use to send a signal to ST and then in turn that could turn a smart TV on to a hdmi port for the CCTV? PS At present I am asuming that you would use Zone monitioring in ST with a command attached! However I was wondering if this could be short circuited by having direct control from R-PI (as you maybe aware I am not a great fan of any cloud based systems). Last edited on Sunday Jan 7th, 2018 11:44 am by Swiss-Toni |
|||||||||
mattbrain UCM Pi Users
|
You could probably do this without needing to use the R-Pi at all. At my previous house I had used an IR Led to send commands to a TV via an output on the comfort system. I had this mounted in place of the activity LED on a bosch PIR and used the remaining pair of 6 core cable to send the signal to it. |
|||||||||
Swiss-Toni UCM Pi Users
|
Hi Matt Already thought of tyhat one but I would rather go with a hidden system and it would mean haveing a transmitter in line or pertruding out of wall ect. |