| Moderated by: admin | ||
| Author | Post | |||||||||
|---|---|---|---|---|---|---|---|---|---|---|
|
benstinton UCM Pi Users 
|
Hi, I bought an SEM back in December but have only just got round to setting it up.I'm not having much luck and wanted to ask for help. I've attached a photo of the SEM to this post, as I think it looks like a main board. Is anyone able to identify it from the photo, or is there anything I can do to identify it? If it is a main board, is there anything I can do with firmware to retask it, or does it need to be replaced. Thanks Ben Attachment: IMG_2929.JPG (Downloaded 16 times) |
|||||||||
|
slychiu Administrator 
|
That is a Comfort controller not a slave. You can se the ULT 7.xxx marking on the U1 IC and all the extra components on the DSP sideYou can upgrade firmware only for the same type, not to different models. You got a good deal if you paid for a Slave and got a Comfort Master! |
|||||||||
|
benstinton UCM Pi Users
|
Thanks for the swift response. Every cloud.. I will get back to Laser and see what they advise. |
|||||||||