Comfort  Automation/ Security System Forums Home
Home Search search Menu menu Not logged in - Login | Register

OP04 Output Submodule with 4 Relays
 Moderated by: ident
 New Topic   Reply   Printer Friendly 
 Rating:  Rating
AuthorPost
 Posted: Thursday Nov 14th, 2019 12:10 pm
   PM  Quote  Reply 
1st Post
slychiu
Administrator


Joined: Saturday Apr 29th, 2006
Location: Singapore
Posts: 5493
Status: 
Offline

  back to top





OP04 is an Output Submodule with 4 Relays which plugs in to CM9001 in place of OP01 (with 8 open-collector Outputs).
This connects 4 relays direct to Outputs 1 to 4 of CM9001. Outputs 5 to 8 are not available when OP04 is plugged in







 Posted: Wednesday Nov 20th, 2019 03:26 pm
   PM  Quote  Reply 
2nd Post
Swiss-Toni
UCM Pi Users


Joined: Thursday Sep 15th, 2011
Location: Greater London, United Kingdom
Posts: 349
Status: 
Offline

  back to top

With the OPO1 if the board goes you would just replace the board, if this goes you have to replace the board or is that a resetable fuse set into it, also what what is the voltage max capacity.



 Posted: Thursday Nov 21st, 2019 01:15 am
   PM  Quote  Reply 
3rd Post
slychiu
Administrator


Joined: Saturday Apr 29th, 2006
Location: Singapore
Posts: 5493
Status: 
Offline

  back to top

If this fails you also replace the submodule just line OP03 and OP01

It is less likely to fail than OP03 or OP01 because the relays have 5000V isolation/breakdown volatge.
In OP01 and OP03 the outputs are open collector transistor outputs and are more easily damaged



 Current time is 01:10 am
Top




UltraBB 1.172 Copyright © 2007-2014 Data 1 Systems