Comfort  Automation/ Security System Forums Home
Home Search search Menu menu Not logged in - Login | Register

Automation Contrrol when arming or Disarming the Securty System
 Moderated by: slychiu
 New Topic   Printer Friendly 
 Rate Topic 
AuthorPost
 Posted: Sunday Sep 6th, 2020 05:18 am
   
1st Post
slychiu
Administrator


Joined: Saturday Apr 29th, 2006
Location: Singapore
Posts: 5493
Status: 
Offline

  back to top

When the security system is armed to any mode ie Away, Night, or Day Mode, or when the system is disarmed to Security Off Mode, it is possible to execute a Response to control any device that is connected to the system. 

In Comfigurator 3.13.5 and above, go to Alarns > Partition Events as shown below.




Assign a Response to Security Off, Away Mode, Night Mode or Day Mode for each Partition. Comfort has up to 4 partitions. Partition 0 is used for Non-partitioned systems
For example, in Away ode, you can switch off all lights and appliances, or in Night Mode switch off downstairs lights, but switch on the outside light. For Security Mode, you could turn on lights and appliances. The possibilities are endless. 



Note that this is NOT just for Partitioned systems. Even if the system is not partitioned, the Security Off, Away, Night, Day Mode Responses must be programmed here
Note: Security Off, Away, Night, Day Mode Responses  were previously in Events > Miscellaneous Events in older versions of Comfigurator prior to 3.13.5


Last edited on Sunday Sep 6th, 2020 05:21 am by slychiu



 Current time is 09:49 am
Top




UltraBB 1.172 Copyright © 2007-2014 Data 1 Systems