Comfort Automation/ Security System Forums > Support > FAQs - Technical > removed door station. advice please |
Comfort Automation/ Security System Forums > Support > FAQs - Technical > removed door station. advice please |
| Moderated by: admin | ||
| Author | Post | |||||||||
|---|---|---|---|---|---|---|---|---|---|---|
|
mccltd Member
|
Hi, I have recently removed the door station from my front door and reprogrammed the comfort to show 0 door stations. Trouble is the telephones no longer work. the comfort doesn't dial out and I can't use an internal phone anymore. Is there some else I need to do? |
|||||||||
|
Swiss-Toni UCM Pi Users 
|
Sounds like the telephone wires have been pulled out of the comfort panel to me or one of the cables for telephone has been damaged, have you tried bypassing comfort? |
|||||||||
|
slychiu Administrator 
|
Removing door station should not affect your telephone as Swiss says |
|||||||||
|
mccltd Member
|
thank you, I shall go and re check wiring and try bypassing the unit. |
|||||||||
|
Home Comfort Installers
|
Is it a C1 If it is then its no longer supported AND dont use current software to configure. \this may be the problem |
|||||||||