Comfort Home Automation/ Security System Forums Home
Home Search search Menu menu Not logged in - Login | Register

Dialout after CMS has long delay
 Moderated by: admin
 New Topic   Reply   Printer Friendly 
 Rate Topic 
AuthorPost
 Posted: Friday Apr 1st, 2022 02:04 am
   PM  Quote  Reply 
1st Post
slychiu
Administrator


Joined: Saturday Apr 29th, 2006
Location: Singapore
Posts: 5246
Status: 
Offline

  back to top

Phones 1 and 2 are for Central Monitoring Stations (but they can be used for other phone types if CMS is not needed).

When phones 1 and /or 2 are programmed for CMS, note that there is a 3 minutes delay before the rest of the phones are dialed in ALARM state. This is to allow for the CMS operator to call the keyholder at the alarms phone number.  This may lead you to think that the system is not dialing out to the other phones due to the long delay

This setting is in Comfigurator > Telecoms > Dialing > CMS Delay in Alarm. If the value is changed to 0, then there is no delay

Note that this affects Alarm Types which have alarm state 3, not Idle or Alert Alarms

Last edited on Friday Apr 1st, 2022 02:07 am by slychiu



 Current time is 06:57 am
Top




UltraBB 1.172 Copyright © 2007-2014 Data 1 Systems