Comfort  Automation/ Security System Forums Home
Home Search search Menu menu Not logged in - Login | Register

Setting Annoucement Level From A Response
 Moderated by: admin
 New Topic   Reply   Printer Friendly 
 Rate Topic 
AuthorPost
 Posted: Saturday Aug 5th, 2023 03:23 pm
   PM  Quote  Reply 
1st Post
Tas
Member
 

Joined: Monday Feb 11th, 2008
Location: London, United Kingdom
Posts: 39
Status: 
Offline

  back to top

Hi,
Is it possible to do this? Ideally I'd like to set it to a value that has been stored in a counter.
I figured there must be a way to set the value of any location but I can't find anything in the action codes reference.
Many thanks,Tas



 Posted: Sunday Aug 6th, 2023 01:43 am
   PM  Quote  Reply 
2nd Post
slychiu
Administrator


Joined: Saturday Apr 29th, 2006
Location: Singapore
Posts: 5507
Status: 
Offline

  back to top

You can save a value into any location using the DL command. From  the  Comfort protocol document

PC: DLaaaann (byte1) (byte2) (byte3) ..... (bytenn),(checksum)
UCM: OK
aaaa is address in EEPROM in hexadecimal notation
nn is the number of bytes to be sent on this line, not including checksum and headers.

eg
DL005401307B will write value 30H into location 0054H (checksum 7B if my calculation is correct)



 Posted: Sunday Aug 6th, 2023 07:51 am
   PM  Quote  Reply 
3rd Post
Tas
Member
 

Joined: Monday Feb 11th, 2008
Location: London, United Kingdom
Posts: 39
Status: 
Offline

  back to top

Hi Slychiu,
It's great to hear from you. I hope all is well with you.
Thank you for the reply. From my understanding this is what I could do if interfacing with comfort via the serial protocol from a serial/ethernet UCM. In my latest installation I only do this for programming and my system integration is via the KNX module. So I am looking for a way to set this location from within comfort via a response. Is this possible?
Many thanks,Tas



 Posted: Wednesday Aug 9th, 2023 01:49 am
   PM  Quote  Reply 
4th Post
slychiu
Administrator


Joined: Saturday Apr 29th, 2006
Location: Singapore
Posts: 5507
Status: 
Offline

  back to top

Hi Tas. Sorry I cannot think of any way to do it from KNX



 Current time is 06:25 am
Top




UltraBB 1.172 Copyright © 2007-2014 Data 1 Systems