| Posted: Sunday Oct 29th, 2023 08:53 pm |
|
1st Post |
NickLocke
Member
| Joined: | Monday Jun 15th, 2015 |
| Location: | |
| Posts: | 11 |
| Status: |
Offline
|
back to top
|
I still have a Comfort 1 (yes, I know, time to change!).
All of a sudden I have heard the keypad announcing "Communication Failure 81". I can't find any reference to "81" in the various documents which talk about SEM, LEM etc - so I am hoping someone can shed some light on where I need to look.
It may be related, or maybe not, but I have always had zones 1 and 5 configured to announce when they are activated. They are both zones on the main board, of course. At the moment, I hear the announcement for zone 5, but not for zone 1.
Any thoughts would be very welcome.
Thanks,
Nick
|
| Posted: Monday Oct 30th, 2023 01:24 am |
|
2nd Post |
| Posted: Monday Oct 30th, 2023 03:47 am |
|
3rd Post |
slychiu
Administrator
| Joined: | Saturday Apr 29th, 2006 |
| Location: | Singapore |
| Posts: | 5596 |
| Status: |
Offline
|
back to top
|
But you are right. It is time to upgrade after 20 years
|
| Posted: Monday Oct 30th, 2023 09:17 pm |
|
4th Post |
NickLocke
Member
| Joined: | Monday Jun 15th, 2015 |
| Location: | |
| Posts: | 11 |
| Status: |
Offline
|
back to top
|
Hi Chiu,
Thanks for the prompt and helpful response. I do indeed have an old RIO, so that makes sense. I have just had a poke around with my meter and I can see 12V on JP12 which is the power coming in. But on the connector blocks, I am only seeing 0.39V between the 12V and 0V connections - so something is pulling that voltage down.
So, tomorrow (when I am properly awake) I will have a look to see whether something is shorting the RIO output. If not, then maybe what looks like it's a small voltage regulator on the RIO board may have died.
On your point about upgrading, do you have a recommended UK installer?
Thanks,
Nick
|
| Posted: Tuesday Oct 31st, 2023 01:17 am |
|
5th Post |
|
