slychiu
Administrator
Joined: | Saturday Apr 29th, 2006 |
Location: | Singapore |
Posts: | 5615 |
Status: |
Offline
|
back to top
|
Some installations may require SNMP interface for the monitoring of the EMS Sensors and alarms.
The 3rd party SNMP to Modbus Master Interface module (HD67164-485-B2) may be used for this purpose.
This requires a UCM/Modbus-485 configured as a modbus Slave. The Modbus RTU (RS485) terminals are connected to the Modbus terminals of the SNMP to Modbus interface which acts as a Modbus Master. This has been tested in a CM9001-EMS system and works well. Let us know if any other information is required for this application.
|