There was a bug in UCM 5.192 that stopped the C? and S? commands from working UCM 5.200 (Not released yet) fixes this, see attached. Please ...   Sunday Oct 25th, 2009 03:49 am

See the announcement of the new UCM/232 in the UCM Forum http://www.comfortforums.com/forum4/1641.html ...   Saturday Oct 24th, 2009 08:58 am

The picture shows how the APB01 is plugged into the TEL IN and TEL Out connectors on Comfort Note that the APB01 can be reversed in ...   Saturday Oct 24th, 2009 08:55 am

The APB01 ADSL Protection/Passthrough Board allows ADSL broadband signals to pass through Comfort without being affected, so that the ADSL modem can be plugged to ...   Saturday Oct 24th, 2009 08:53 am

UCM/ETH03 with ethernet Interface is shown below http://www.comfortforums.com/forum113/3695.html http://www.cytech.biz/temp/Images/ETH/ucmeth3small.jpg The older UCM/Eth02 (replaced by UCM/ETH03) is shown here. The outline size of UCM/ETH03 and UCM/ETH02 are the ...   Saturday Oct 24th, 2009 08:42 am

The UCM/USB with USB Interface is shown here The 1st photo below shows the new version of the UCM/USB with SW7 shunts replaced by DIP switches. ...   Saturday Oct 24th, 2009 08:41 am

This is the Rs232/PB plug in board which canbe bought separately. It plugs on top of a UCM06 to provide the RS232 interface on the ...   Saturday Oct 24th, 2009 08:37 am

The UCM05 which is the UCM with Rs232 interface will be replaced by the UCM/232 as soon as the stocks of UCM05 run out. The UCM/232 ...   Saturday Oct 24th, 2009 08:36 am

This is a new version of the 2008 video with a new soundtrack without the drumbeat which some people complain was too distracting http://www.youtube.com/v/vHS6zTFFLiM&hl=en&fs=1 ...   Saturday Oct 24th, 2009 02:12 am

I forgot to say the we now have a UCM/USB which allows you to connect via USB instead of the Rs232 serial port which can ...   Saturday Oct 24th, 2009 01:08 am

Unfortunately your UCM is UCM01 which is not able to upgrade Comfort firmware. The UCM05 shown below has the 6 way and 2 way programming ...   Saturday Oct 24th, 2009 01:04 am

If you find Kate, the voice of Comfort talking too slow or fast, you can make her talk faster or slower without changing the pitch ...   Thursday Oct 22nd, 2009 12:53 pm

Thanks for your feedback. There finally seems to be more manufacturers rolling out Z-Wave products so there may be more to choose from before too ...   Thursday Oct 22nd, 2009 12:30 pm

Did you see Juwi_UKs post about his ZWave experience? http://www.comfortforums.com/forum62/1638.html It is wireless, not as powerful as Cbus buta less expensive alternative ...   Thursday Oct 22nd, 2009 12:27 pm

The wav files can be downloaded from http://www.cytech-technology.com/temp/software/MymaVoiceFiles.zip ...   Thursday Oct 22nd, 2009 02:29 am

The main difference is that Ulti is one way and C-Bus wireless is 2 way UCM/Ulti works with Ulti. Comfort can send scene commands to Ulti ...   Thursday Oct 22nd, 2009 02:04 am

A new English voice is now ready for testing, named "Myma" after the professional voice talent that did the recording. Please download from myma31 Only those ...   Wednesday Oct 21st, 2009 01:53 pm

The next Comfort Training course shall be at the Building Research Establishment (BRE) in Watford in the north of London on 14th and 15th January ...   Wednesday Oct 21st, 2009 12:32 pm

To find the firmware version, go to Engineer Menu and press 7,4,3 The menu will announce the firmware eg "Week 5, 145 ,,, etc" for Ultra ...   Wednesday Oct 21st, 2009 11:35 am

Slave Siren, Strobe and Speaker can be used on Slave Fixed Bug - initial value of Slave zones reported after reset to Comfort is wrong but ...   Wednesday Oct 21st, 2009 09:17 am

Comfigurator 3.1.3 is able to Scan All Modules and discover the firmware of modules depending on a minimum firmware version, see http://www.comfortforums.com/view_topic.php?id=1625&forum_id=20 ...   Wednesday Oct 21st, 2009 09:06 am

Yes, you are correct. However it seems not to give anny error. Anyway we have corrected our files. Thanks for the feedback ...   Wednesday Oct 21st, 2009 05:32 am

29 is the current one, 30 has not been released yet, but can be used in current Comfort systems ...   Tuesday Oct 20th, 2009 01:44 pm

I see what you mean. The Graphical settings are for the future KT03 touchscreen, and is not for any current Comfigurator feature ...   Monday Oct 19th, 2009 02:27 am

Can you send the cclx file to support@cytech.biz? ...   Monday Oct 19th, 2009 02:08 am

* On the ZWave settings form the reset button on my (my firmware is 5.184) version throws an invalid eeprom error and tells me to ...   Sunday Oct 18th, 2009 10:11 am

I see, this is the Options > Settings Screen. We can include some help or tooltips next time In the meantime are there any parameters which ...   Sunday Oct 18th, 2009 10:08 am

In the case where the call goes to voicemail, there will be no acknowledgement ie # key or sign in, Comfort will hang up after ...   Sunday Oct 18th, 2009 10:02 am

Where do you see the Graphical Editing screen? I did not even know we had such a feature The feature for partial reset of UCM after ...   Sunday Oct 18th, 2009 03:29 am

When Comfort dials out during an alarm, the home phones are cut off for the duration of the dial out for security reasons. You cannot ...   Sunday Oct 18th, 2009 02:18 am

It is difficult to comment on third party converters. You really have to test to see if they will work with the UCM/Ethernet So the UCM/Ethernet ...   Saturday Oct 17th, 2009 08:10 am

Please download the UCM Manual to get instructions on the UCM/Ethernet and the other varieties of UCM If the UCM has a DB9 connector, you can ...   Saturday Oct 17th, 2009 02:01 am

We shall see if this can be done ...   Friday Oct 16th, 2009 01:11 pm

You can download from http://www.cytech-technology.com/temp/software/Wizcomfort1_4_6.zip But be warned that it may not work so well with the new Comfort II ...   Friday Oct 16th, 2009 01:03 pm

During an alarm, Comfort dials to the programmed numbers. After signing in, the user can listen to the keypads for any sounds or even talk ...   Friday Oct 16th, 2009 01:30 am

The Doorbell siren type is applied when the doorbell is pressed regardless of the doorbell alarm settings Go to the Doorbell siren and set a very ...   Thursday Oct 15th, 2009 01:10 pm

What firmware did you upgrade to and what was it upgraded from? ...   Thursday Oct 15th, 2009 12:16 pm

We have confirmed that this was due to a bug in the previous versions of Comfigurator. When you convert a file from a different File ...   Thursday Oct 15th, 2009 07:12 am

Warby, this is a known issue with firmware 5.164, It was fixed in 5.169, see http://www.comfortforums.com/forum60/1628.html ...   Thursday Oct 15th, 2009 02:39 am