Yup, I'm happy to report, that now after 48 hours or so, my comfort time still appears to be correct, and stable... I guess the initial ...   Wednesday Apr 25th, 2012 11:11 am

Getting closer... - this other thread discusses the same issue in some considerable detail, and mentions the "fix" I am referring to as being implemented ...   Tuesday Apr 24th, 2012 09:32 am

Yes, that was exactly it... - I actually have found the original post - here: http://www.comfortforums.com/view_topic.php?id=1803&forum_id=77&highlight=wiser but the "fix" you provided for me isn't mentioned, ...   Tuesday Apr 24th, 2012 08:44 am

A number of years ago, when I first implemented my CBUS Wiser unit, I experienced problems which took quite some time to track down - ...   Monday Apr 23rd, 2012 04:59 pm

Aha, yes that makes sense... I was using the very latest version of the manual from the website... Although I see that it does ...   Monday Apr 16th, 2012 12:26 pm

Yup. - that did the trick... thanks for the help. I may be wrong, but I didn't spot any mention of this point in the UCM ...   Sunday Apr 15th, 2012 08:27 am

Aha.. Yes that sounds like a likely culprit... Yes my UCMs both have built-in serial ports. I'll try that additional shunt shortly... Thanks! Paul G ...   Sunday Apr 15th, 2012 07:20 am

Update: I just upgraded my main Comfort and UCM firmwares to the latest (Ultra 6.011, UCMs 6.012). This has made no difference... Is there *anything* else ...   Saturday Apr 14th, 2012 05:28 pm

I just upgraded an existing UCM from RS232 to ethernet by adding an ETH01 module, yet no matter what I do I cannot get Comfigurator ...   Saturday Apr 14th, 2012 02:51 pm

Hmm.. I do agree... but also is hugely more expensive... - and, is a "special order item" with my usual supplier... ...   Friday Mar 30th, 2012 01:58 pm

Maybe replacing it with a DP03X & DM02 setup would be a little more robust... - it's a little dearer than just buying another DPO3, ...   Friday Mar 30th, 2012 01:49 pm

I suspect you are right... and I will do just that tomorrow... Cheers. ...   Friday Mar 30th, 2012 01:40 pm

WOW, is this uncanny or what.... - look at the date of the first post in this thread... - almost exactly a year to the ...   Friday Mar 30th, 2012 01:25 pm

5.156 as best as I can tell (not local to it right now to double-check). The hardware handshake option sounds feasible; - I certainly didn't make ...   Monday May 9th, 2011 01:19 pm

Hi Chiu No, I'm currently using RS232 UCM I went back to version 3.2.4 - for no other reason than that was the most recent previous version ...   Monday May 9th, 2011 11:12 am

I installed 3.2.8 over the weekend, but immediately hit a problem and had to revert back to an earlier version. After install, I got the missing ...   Monday May 9th, 2011 07:50 am

Hmmm... some *very* odd things have been hapenning the past few days.... Not only was the first keypad inactive (keys unresponsive), but the words displayed on the ...   Thursday Apr 7th, 2011 10:49 am

Yup comfigurator 3.2.4 IIRC, and definately new CCLX file format. I haven't had a chance to check anything yet, as it was only late last night ...   Monday Apr 4th, 2011 11:40 am

Thanks Andy, Mine "appears" OK speaker wise... - the voice announcements on the outside doorphone are coming through lound & clear - which is part of ...   Monday Apr 4th, 2011 09:57 am

I just came across this as I was researching the options for a new door station... - As per my recent post in the "troubles" ...   Monday Apr 4th, 2011 09:33 am

Thanks, just after I posted the question I worked out that it was referring to the door station... - I think it has been playing ...   Monday Apr 4th, 2011 08:16 am

Hi. Suddenly started getting communication failure 49 as of this morning... anyone tell me what this points to? - everything appears to be working apart ...   Sunday Apr 3rd, 2011 05:55 pm

Nope, - mine has a big square IC in socket marked CBUS 5.75, and the CBUS daughterboard is marked 1223/5 so I guess I'm out ...   Thursday Dec 23rd, 2010 04:41 pm

slychiu wrote: No it is not imminent, stil in the planning stages. The main difference in the hardware will be the addition of an EEPROM ...   Tuesday Dec 21st, 2010 12:57 pm

Thanks Chiu, I'm not at home now so I can't check, - and honestly, I haven't looked at it for such a long time that I ...   Tuesday Dec 21st, 2010 11:53 am

slychiu wrote: The new SIMs are all of the ST7 version. There may be  no version marking At the moment the main advantage of the new ...   Tuesday Dec 21st, 2010 11:12 am

slychiu wrote: One of the features to be implemented in a new generation UCM/CBus will be an option to send Comfort Time to Cbus just ...   Tuesday Dec 21st, 2010 10:53 am

admin wrote: Perhaps the speaker is damaged. You can check by measuring the AC voltage at the speaker terminals. If you can see a voltage ...   Monday Dec 13th, 2010 08:10 am

By jove I believe that's it! I've never come across that setting before, so it must have always been unchecked, and as you say, not relevant ...   Monday Dec 6th, 2010 02:27 pm

New problem.... KP voices are now all OK, but the LED's are definitely not operating correctly.. - A case in point that I made a ...   Monday Dec 6th, 2010 07:28 am

I swapped out the PCB & speaker from the new keypads into my original enclosures, thus keeping the original key membrane, and the polycarb enclusures ...   Saturday Dec 4th, 2010 03:16 pm

No, not the really old *original* keypad design... - I changed over from then when I upgraded from G1 to G2. I have the new ...   Tuesday Nov 30th, 2010 12:05 pm

One more bit of feedback... SWMBO has just informed me that the new KP Design is less effective than the slightly older design we had in ...   Monday Nov 29th, 2010 01:29 pm

Yup, that seems like it might well be the case, - I just swapped one out for a new one, and the voice is back.... ...   Saturday Nov 27th, 2010 09:37 am

I'll give that a go. I'm also likely to have to power down the panel completely in the next week or two, since I'm having ...   Friday Nov 26th, 2010 08:32 am

Update to this: - I haven't had the free time to do the troubleshooting with the replacement keypad yet, but in the meantime, that keypad ...   Thursday Nov 25th, 2010 10:53 am

I have 3 keypads in total: ID1: adjacent to front door (main entry path) ID2: adjacent to my bed ID3: adacent to Comfort panel in Node 0 ID1 is ...   Friday Nov 5th, 2010 09:51 am

Hi, been meaning to get round to investigating this for a little while, but some fairly major home renovations have been sucking up all my ...   Friday Nov 5th, 2010 09:23 am

ident wrote: The DST action is now unnecessary for Comfort II and should not be used as Comfort automatically adjusts the time when the daylight ...   Wednesday Apr 7th, 2010 09:31 pm

Yup, you're right... - I only had time to check it before I had to leave this morning, but it's definitely an hour behind in ...   Tuesday Apr 6th, 2010 04:04 pm