Thanks Chiu Probably hadn't noticed since I don't use it that often. I can clean up the config file now. ...   Saturday Apr 20th, 2024 09:19 am

I have a response attached to the F key to arm to vacation mode i.e. press F twice.I noted recently this no longer works but ...   Friday Apr 19th, 2024 06:50 pm

Feedback to finish this thread. I have fitted a 9001 board and the phone now dials out as it should. This means the fault ...   Sunday Nov 26th, 2023 03:31 pm

My learning points from this thread: There is a subtle difference in arming from keypad and by remote control (i.e. home phone, remote dial-in and ...   Thursday Oct 19th, 2023 10:01 am

It looks like the same issue as mentioned by others in this thread... Is there a fix or shall I downgrade the slave (SEM02-M2) to the ...   Thursday Oct 19th, 2023 09:24 am

I have just updated to the latest firmware - Updated ULT (7.201) UCM (7.176) and SEM (7.207) firmware and am relieved to see that others ...   Monday Oct 16th, 2023 05:58 pm

That compatibility check is for Comfort I to Comfort II. Since I already have a a Comfort II CP9000-ULT system, the CM9001 should be effectively compatible ...   Monday Oct 16th, 2023 05:37 pm

Many thanks Sota. I also found this site.. 10 Best Free SMTP Servers for Transactional Emails in 2023 https://www.emailvendorselection.com/free-smtp-servers/ ...which offers a bit more choice of external servers ...   Monday Oct 16th, 2023 05:13 pm

Now that is a novel idea, Sota. I hadn't thought of that. Any idea how difficult it is to set up for the technically intermediate i.e ...   Sunday Oct 15th, 2023 05:27 pm

To close this matter, I updated to the latest firmware (Controller, UCM and SEM) and the phone dialout seems better but not completely right. Sometimes ...   Friday Oct 13th, 2023 03:03 pm

Interested to know what SMTP servers people use for Comfort transactional emails. I have several pieces of kit that issue transactional emails (Acronis backup, UPS, network ...   Friday Oct 13th, 2023 02:15 pm

Just checked my mobile gives the usual UK "Brrring Brrring" tone, not "beep beep" or engaged. Certainly doesn't ring for 30 seconds. I see there are ...   Tuesday Oct 10th, 2023 12:29 pm

I'm not sure when this started. I don't often get dialouts from my system and it was only noticed as part of my recent system ...   Tuesday Oct 10th, 2023 10:56 am

I'm doing a system check and noticed that when Comfort was dialling from my door station to my mobile - I would receive the call ...   Monday Oct 9th, 2023 06:23 pm

I will thanks. Digging deeper, my remote arming does not appear to activate the SystemSet alarm either. I have a few responses attached to this ...   Sunday Oct 8th, 2023 05:09 pm

Thanks Chiu To see if there is a programming glitch I need to understand how the remote arming works. Remote arming doesn't need an exit door ...   Friday Oct 6th, 2023 10:35 am

I have noticed that if I arm remotely (phone or via app) and later enter the building to disarm locally, there are no warning blips ...   Thursday Oct 5th, 2023 09:03 pm

Many thanks as always for the quick reply, Chiu. The vocab upgrade worked first time so it does not appear to be a chip fault. ...   Friday May 5th, 2023 03:30 pm

Comfort 2 Ultra 7.116 FS 34, Comfigurator 3.13.9.0 I generated a custom vocabulary a few years ago and the system has been working fine. I recently decided ...   Monday May 1st, 2023 05:02 pm

So do you use the CBUS UCM then with the CBUS Homebridge plugin ? What do you run the Homebridge s/w on ? Is ...   Thursday Oct 27th, 2022 05:49 pm

I installed Comfort over 20yrs ago when I planned light wiring to node zero for the main entry zone to be controlled by relays or ...   Sunday Oct 23rd, 2022 11:55 am

I think I have solved this conundrum. Mea culpa During my refit I must have set the SystemSet alarm response to have the strobe on - this ...   Tuesday Mar 10th, 2020 12:50 am

Just to close this thread - I have fitted a new CQR Senza with LED strobe which appears to be working as expected. Learning point - ...   Wednesday Feb 26th, 2020 01:14 pm

Ah.. Comfort appears to always apply the correct voltage. When strobe stops unexpectedly, SRN+>STR- is still 12v i.e. the trigger voltage is still applied. It is not ...   Monday Feb 17th, 2020 12:43 pm

Not quite sure I understand Chiu. Do you mean the SRN+ to STR- voltage ?And "goes off" is strobe active or inactive? When the strobe is active ...   Monday Feb 17th, 2020 11:34 am

Odd problem. Changed 10yr old Cequra1 box about 18 months ago for a Cequra Super plus. All seemed to work but on routine check after a ...   Monday Feb 17th, 2020 10:34 am

I'll have a look thanks Chiu. It does other odd things though too which is why I wondered if there was a config file I had ...   Wednesday Sep 18th, 2019 01:50 pm

If the alarm types are fixed, is it possible in future to configure fixed text to be included in the email - this could tell ...   Tuesday Sep 17th, 2019 09:22 am

Thanks Chiu Unusually restrictive for the usually impressive flexibility of Comfort - I had thought there must be a config file somewhere :? ...   Monday Sep 16th, 2019 08:12 pm

I was puzzled why I got a "Homesafe" notification by ETH03 when the Comfort Flood alarm tripped (Alarm type 26). The reason is that in ...   Sunday Sep 8th, 2019 08:24 pm

I was thinking through a UCM RS232 to a Digi XBee-PRO ZigBee adaptor. You have made reference to this with a Schneider adaptor in the past ...   Thursday May 2nd, 2019 02:33 pm

I am looking at the QMotion blinds which have a Zigbee control option. Has anyone successfully interfaced Comfort with Zigbee and these blinds in particular?  ...   Wednesday May 1st, 2019 12:51 pm

Solved (to my satisfaction anyway). I now have different doorphone greetings for when we are in and out. Background: a) the doorphone response is always called ...   Sunday Oct 7th, 2018 11:16 pm

I have programmed the Doorphone to take a message when the system is armed using the Doorbell alarm. The take-a-message greeting used by the doorphone is ...   Wednesday Sep 26th, 2018 02:59 pm

SOLVED: the Kate.ini file used by VoiceProc to create the custom vocab must have vocabNo set to 254 to indicate to Comfort that it is ...   Wednesday Aug 15th, 2018 08:42 am

Thanks Chui - I have eventually worked out how to do the word substitutions with the new IVS files. I now have the 20 words ...   Tuesday Aug 7th, 2018 09:59 pm

I'm trying to get to grips with VoiceProc to swap a few words. I have downloaded the Kate_IVS zip from Cytech site but it seems ...   Friday Jul 20th, 2018 08:45 am

I recently had exactly the same problem with a new Cequra. 2 beep arm gone and generally flaky siren response. After much testing I changed the ...   Thursday Jul 5th, 2018 09:34 pm

Ah... of course. Didn't think of that. Thanks again. ...   Tuesday Jun 5th, 2018 09:00 pm

Sorry Chiu missed your reply...I have discrete status LEDs in a couple of external PIRs near the entry doors so I can check whether the ...   Monday Jun 4th, 2018 11:01 pm