I assumed this was a new UCM - but perhaps this is not the case ? If so, what UCM's will support this - any ...   Friday Jan 14th, 2011 07:18 pm

Is there a date for the release of the Universal UCM ? And is there an upgrade path for older UCMs ? Thanks ...   Sunday Dec 26th, 2010 05:55 pm

I would suggest terminbating the DSL signal at the master socket, then take the extension feed into the patch panel. If you have a ...   Tuesday Dec 14th, 2010 03:25 pm

Could you tell me where I could obtain an extra plastic backbox, as supplied with the KT03 ? Are these standard double-JBox units ? Potentially ...   Tuesday Dec 14th, 2010 02:24 pm

I set to 0, and reset Comfort. No change. ...   Tuesday Dec 14th, 2010 10:35 am

Yes, I reset Comfort. ...   Tuesday Dec 14th, 2010 10:02 am

I've tried setting the volume in Configuration > Voice Settings > Keypad Voice level right down to 1, but it appears to make no difference ...   Tuesday Dec 14th, 2010 06:43 am

slychiu wrote: The speaker can be turned off completely in the Volume Settings page so all announcements and voice wil be silent Otherwise setting the common ...   Tuesday Dec 14th, 2010 06:17 am

Happened again. Perhaps the LED goes out when the timeout function kicks in ? ...   Monday Dec 13th, 2010 08:46 pm

I've looked at the screen timeout options - and I dont see an option to disable the timeout. ie it stays on permanently Another additional option would ...   Monday Dec 13th, 2010 07:25 pm

Are there any options for altering the contrast of the display ? I dont see any in the default config ...   Monday Dec 13th, 2010 07:23 pm

My wife asked me how do we know if night mode is on ? i had armed the system but no led had light up ...   Monday Dec 13th, 2010 07:15 pm

I am seeing light bleeding from all 4 corners of the LCD through the black front plate. It is more noticeable on the top right ...   Monday Dec 13th, 2010 06:38 pm

Feedback: When powering down, the setting for no keyboard beeps is lost. It reverts to on when powered up again. ...   Monday Dec 13th, 2010 05:29 pm

Feedback: I've tried the KT03 and I just don't see it possible to install into standard Landscape mode for us. The viewing angle is too poor ...   Monday Dec 13th, 2010 05:27 pm

When disarming, the volume level is ignored and "security off" appears to be played back at a loud volume. Thereafter, all other functions are at ...   Monday Dec 13th, 2010 04:57 pm

Hi Can you point me to the potrait config please ? When I choose Portrait without changing anything in the design, and want to use the ...   Monday Dec 13th, 2010 04:29 pm

With a dimming system, such as that with CBUS, can the KT03 support a slider for dimming, display the level of dim, and directly control ...   Saturday Dec 11th, 2010 09:29 pm

If the UCM must be #1, then that's the UCM normlly located in the Comfort main panel. So I either remove the KT03 from the ...   Friday Dec 10th, 2010 08:14 am

Given that the UCM needs to be within a few inches of the target device to have it's firmware upgraded, does this mean I would ...   Thursday Dec 9th, 2010 02:16 pm

So I'm going to officially ask for this. An update so that the keypad beeps can be DISABLED. Putting the volume down isn't really practical as ...   Sunday Nov 28th, 2010 07:28 am

I think the firmware enhancement is a safer option ...   Tuesday Nov 23rd, 2010 03:43 pm

Disabling the sound is acceptable to me. Be nice if it was programtic too. ie if already in night mode, then keep quiet ! ...   Tuesday Nov 23rd, 2010 01:21 pm

One thing that I find very annoying, is that I cannot stop the KP04 (and previous) from beeping when you press the buttons. We don't ...   Tuesday Nov 23rd, 2010 08:02 am

Firmware upgrades always delete my answerphone greetings and recorded announcements ...   Wednesday Oct 20th, 2010 07:54 am

It's that time of year again where I have to re-record stored announcements for the doorbell to send via the DP02. This is because firmware updates ...   Tuesday Oct 19th, 2010 06:11 pm

Sure - done. The problems I had yesterday were : I wanted to upload some new Infrared codes. The UCM I use to program was unresponsive I had ...   Tuesday Oct 19th, 2010 03:57 pm

This one is driving me mad ! I was performing some IR updates, and for whatever reason the UCM was then reported on the keypad as ...   Tuesday Oct 19th, 2010 11:26 am

What is used to program the screens ? Will there be many samples included - especially for CBUS ? ...   Sunday Oct 3rd, 2010 06:31 am

I use this, but CBUS takes care of the voltage free switching. Comfort controls the logic. I also installed a 2 way switch, so I can ...   Wednesday Sep 1st, 2010 03:11 pm

Does this keypad support the disabling of the annoying button beeps on a KP0x ? On the KP03 this can only be achieved by having ...   Friday Aug 20th, 2010 01:16 pm

Is this released now ? Link ? ...   Monday Aug 9th, 2010 08:12 am

One thing to note - Clipsal don't receommend more than around 1,000,000 writes to the DLT chip, as they have limits on how many times ...   Sunday Aug 8th, 2010 08:08 pm

Well, you might as well tell us more. What are the new benefits of the new KP05 ? Is it purely aesthetic ? New functions ? ...   Thursday Jul 29th, 2010 08:17 am

I think it's the RIO getting overloaded. As we don't have a PAUSE or WHILE/WEND type functionality, I'm going to have to create a vast ...   Thursday Jun 24th, 2010 04:26 am

Also, I've now noticed that some CBUS commands are also not working when the AwayMode response is called. So this is not limited to the relays. ...   Monday Jun 21st, 2010 12:50 pm

ok - will send my config over for you to take a look ...   Sunday Jun 20th, 2010 05:24 am

Is there a limit on nested DOs ? I have some actions that trigger some relays - but they refuse to work in my AwayMode and ...   Saturday Jun 19th, 2010 08:57 pm

Well, that was monumentally stupid of me. BBSB-Cleardown should have called BBSB-OFF not BBSB-1-OFF Thanks ;-) ...   Monday Jun 7th, 2010 06:54 am

Done. I've tried pulliing all power to comfort (not just a reset). When triggering the new responses, mostly it will reset itself and not actually perform the ...   Sunday Jun 6th, 2010 11:11 am