The RLY01 relay module can be used  for automating shades or blinds or curtains Connect one relay to the UP button, another relay to the down ...   Thursday Jul 2nd, 2009 02:30 pm

It appears that Superna may have stopped operations. I have tried to contact them by phone and email with no response ...   Thursday Jul 2nd, 2009 12:32 pm

Please read the attached document when you upgrade firmware to 5.145 and above from an older firmware (very Important) ...   Wednesday Jul 1st, 2009 01:51 pm

If you have upgraded firmware to 5.145 and above and the keypad volume is very soft, this is due to the new volume control menu ...   Wednesday Jul 1st, 2009 01:48 pm

A case study of a Comfort installation in an ancient stone farmhouse in the north of England has been published in the July issue of ...   Wednesday Jul 1st, 2009 12:16 pm

Yes, I wouldnt mind knowing how it works ...   Monday Jun 29th, 2009 01:37 pm

Its a single string with all the group address vallues ...   Sunday Jun 28th, 2009 10:16 am

When the UCM/Cbus is reset, it obtains the on/off status of all C-Bus group addresses through a report that Cbus provides. Hence you wil find ...   Sunday Jun 28th, 2009 02:17 am

There are several 3rd party developers working on this but not completed yet ...   Saturday Jun 27th, 2009 02:38 am

You cannot measure current by probing a test point. The multimeter must be in series with the circuit where you are measuring the current Otherwise check ...   Thursday Jun 25th, 2009 07:56 am

You can also connect extra Sirens to Slaves (SEMs) as they have their own independent power supply and battery ...   Monday Jun 22nd, 2009 01:57 am

Yes you can connect more than 1 Siren and strobe(I assume you mean 2 and not 3 or more) Comfort can supply a maximum of 1A ...   Monday Jun 22nd, 2009 01:56 am

Yes you can Each input on Comfort and any Slave (but not LEM inputs or RIO inputs) is an analog input. Connect your voltage divider across ...   Sunday Jun 21st, 2009 01:46 am

The Comfort Brochure is now on the Building Centre on their website at http://issuu.com/the_building_centre/docs?page=12 together with their other documents ...   Saturday Jun 20th, 2009 04:57 am

You can also play a recorded reminder message to any keypad when triggered by a PIR ...   Friday Jun 19th, 2009 01:48 am

The lighting strike must have given your Comfort temporary insanity, but it still survived which shows how sturdy it is ...   Thursday Jun 18th, 2009 12:18 pm

It looks like something in the Slave was damaged by the lightning. It seems to be not detecting the battery voltage correctly Can you confirm by ...   Thursday Jun 18th, 2009 11:16 am

If you want to talk to someone in the house, you can connect an external amplifier to a keypad. You can talk as well as ...   Thursday Jun 18th, 2009 11:11 am

KP04 firmware cannot be upgraded in the field. The processor and the memory used in this product is not able to support the upgrade feature. ...   Wednesday Jun 17th, 2009 10:55 pm

KP04 Firmware version is indicated on the LCD for a few seconds after reset or when the KA/KB Rs485 bus is not connected or when ...   Wednesday Jun 17th, 2009 04:56 am

Telecare systems can make savings while helping people to stay independent for longer, but it is best to start off small. Report by Andrew Mickel From ...   Wednesday Jun 17th, 2009 12:54 am

IDAS, Ireland’s newly-launched distributor of automation and security solutions http://www.idas.ie/, will host a two-day training course run by Cytech Europe for ...   Tuesday Jun 16th, 2009 11:32 am

We at Cytech have done a bit  of testing but not for a few versions now but will do so. Keep up the good work ...   Tuesday Jun 16th, 2009 08:54 am

In Comfort, Macros are called Responses, go to Events > Responses in Comfigurator There are up to 1023 Responses in Ultra II.  Each Response consists of ...   Sunday Jun 14th, 2009 11:26 pm

Comfort does not have keyfobs of its own. What you have is a third party product. You will have to check with the people who ...   Sunday Jun 14th, 2009 11:01 am

Alarm Type Family Care is also a spare alarm type which can be assigned as you like ...   Saturday Jun 13th, 2009 03:22 am

You can download the Comfort II Ultra worksheet from here Look for Table 30B for Locations for Event Triggered Responses ULT 5.075 is a non-flahs firmware. You ...   Saturday Jun 13th, 2009 02:41 am

It gives you 4 12V/COM terminals The ADM01, RLY01, RLY02 are 1/2 size modules dimension 88 x 53 mm The UCMs, RIO, LEM, DM02 are full siez ...   Saturday Jun 13th, 2009 02:34 am

What is your Comfort model and Firnware version? The locations you mention are for Comfort I Pro only For other versionbs refer to the appropriate worksheet for ...   Friday Jun 12th, 2009 03:13 pm

Yes you need crossed which means you may need to crimp it yourself ...   Friday Jun 12th, 2009 10:17 am

Dial out using SMS and other phone types is only possible by triggering Alarms. In Alarm Types the combination of 8 phones to dial out ...   Wednesday Jun 10th, 2009 02:39 am

Warby Thanks for the report The Issue with the Linear Preset being incremented was found and has been fixed for the new version, see Known issues in ...   Wednesday Jun 10th, 2009 01:23 am

We dont see any such problem here. If you still have this problem send the ccl or cclx file to support@cytech.biz for testing ...   Tuesday Jun 9th, 2009 12:35 pm

Check out http://campaign.indicater.com/API/Campaign.asp in  the online magazine  for security, http://www.prosecurityzone.com/ ...   Tuesday Jun 9th, 2009 12:30 pm

Yes there is a default Response called "Entry Delay in Night Mode" which has these actions If SecurityMode = NightMode Then     Start EntryDelay End If This Response should ...   Tuesday Jun 9th, 2009 12:04 pm

They have probably erased the user codes thus reset back to default This cab be done using User menu 9 for program, 5 for User Codes, ...   Monday Jun 8th, 2009 11:48 pm

Yes you are right. The 1st UCM  is 17, so you dont have to worry about an ID of 15, as it does noty exist ...   Friday Jun 5th, 2009 09:40 am

You can just split up the actions into smaller chunks and send out several DA commands. R! will always work, it executes the Response no ...   Friday Jun 5th, 2009 09:30 am

Comfort firmware has a limit on the number of bytes it accepts for the DA command I just found that the maximum is 36 bytes in ...   Friday Jun 5th, 2009 08:19 am

that is correct (I think) ...   Friday Jun 5th, 2009 08:17 am