Please note that there is a mistake on the Hookup diagram that is inside the Comfort enclosure (see attached) The resistor colour codes are wrong 2700 ohms ...   Wednesday Jul 18th, 2007 03:01 am

An Entry Door is always the best option, as it allows you to arm the system when you leave and to start an entry delay ...   Wednesday Jul 18th, 2007 01:31 am

We have started a new restricted forum for 3rd party developers or manufacuturers who which to develop software and interfaces for Comfort. Contact me to ...   Sunday Jul 15th, 2007 04:32 am

There may be others who are more knowledgeable about the Smartfit operation than us. We implemented the Smartfit LESSST protocol according to the information supplied ...   Sunday Jul 15th, 2007 03:53 am

From Telegraph.co.uk dated 14 July 2007 "Technology will soon make a penthouse lifestyle available to everyone, says Camilla Chafer When Bill Gates spoke about his vision ...   Saturday Jul 14th, 2007 02:41 pm

When we get these requests, I do add them to a list to be considered Do you have an online tool in mind which can support ...   Saturday Jul 14th, 2007 05:33 am

Many years ago before we had the UCM IR learner we used to have a DOS program which converted the hex codes to Comfort IR ...   Friday Jul 13th, 2007 01:37 pm

ACS in Australia has announced the availability of 240V 50Hz UPB Lighting control system  from September 2007 The obvious advantage of UPB being it ...   Thursday Jul 12th, 2007 12:36 pm

The J14 shunt may not be set correctly, based  on whether the MPU01 plug in firmware is installed or not. see http://www.comfortforums.com/view_topic.php?id=303&forum_id=16 This applies only to ...   Thursday Jul 12th, 2007 12:26 pm

The FPR01 will come with the special UCM/Access However it is not available in Europe yet, as the fingerprint reader is not RoHs compatible yet. This ...   Wednesday May 16th, 2007 01:04 pm

All alarm types have their own Responses, including the System Armed and Disarmed Responses When the system is armed to Away, Night, Day modes or disarmed, ...   Wednesday May 16th, 2007 12:55 pm

If you have an older version of the ccl file you can upload with the option Keep Names. If not, then you have a tedious ...   Tuesday May 15th, 2007 02:05 pm

I am afraid the reader manufacturer has not given us any information when it will be RoHs compliant yet. ...   Tuesday May 15th, 2007 12:13 pm

OK, so the Comfort panel is not causing the alarms. The next step is to short the magnetic contact at the end of the cable, ...   Tuesday May 15th, 2007 07:51 am

Adjustment of the trimmer does not affect the siren volume when there is a "full" alarm (Intruder, Fire, Panic, Tamper etc which are alarm state ...   Tuesday May 15th, 2007 12:52 am

Do you mean even after  you shorted the zone,  there was an alarm caused by triggering at the (same) zone? ...   Tuesday May 15th, 2007 12:47 am

Great idea! ...   Wednesday May 9th, 2007 02:30 pm

This is an article about the lawsuits relating to RF lighting products in the US Lutron is suing Leviton for infringing on patent rights that have ...   Wednesday May 9th, 2007 01:55 pm

This looks like an interesting platform for Comfort control http://blogs.pcworld.com/staffblog/archives/004332.html $799 retail The Q1 Ultra is a 1.5-pound hand-held PC that runs a full version of Windows ...   Wednesday May 9th, 2007 01:35 pm

Sorry for my non-reply. I did not get any notification with this topic for some reason There is actually no inconsistency with the terminology that we ...   Wednesday May 9th, 2007 09:35 am

UPB is supposed to be a good Power Line Carrier system. However as far as I know the products only work for 110V supply. I ...   Wednesday May 9th, 2007 05:53 am

It is possible to prevent a keypad from announcing eg while arming and disarming the security system. This may be useful for keypads in childrens ...   Monday May 7th, 2007 10:09 am

After substantial use and testing, 2.1.2 now has a list of known bugs see http://www.comfortforums.com/forum20/369.html If you find these are acceptable and do not affect your ...   Sunday May 6th, 2007 07:11 am

If you can get the UCM05 serial interface near the Sidekick, then that would be a cheaper option than the UCM/Ethernet, as Rs232 can only ...   Sunday May 6th, 2007 05:54 am

Perhaps, but nevertheless we have to focus our efforts on products that are essential for the product and cannot be obtained elsewhere. If there are ...   Sunday May 6th, 2007 02:17 am

That does seem to be a problem that should be fixed soon ...   Sunday May 6th, 2007 02:10 am

Thanks. This will be fixed in the next release ...   Sunday May 6th, 2007 01:53 am

We produced the LSM some years ago but have only sold about 10 - 20 sets per year Due to the problems encountered by some users ...   Saturday May 5th, 2007 10:33 am

We use this all the time. It is not difficult to avoid problems as long as you realise that when the target response of a timer ...   Saturday May 5th, 2007 10:25 am

This example shows how to do X from 6 AM to 11 PM and do Y at other times If  Hours < 6 Then    Do ...   Saturday May 5th, 2007 10:12 am

That would severely limit the user of timers Timers can be set to many diferent values eg Resp 1 Do Resp 2 after 10 seconds using Timer 1 Resp 2 Do ...   Saturday May 5th, 2007 10:02 am

I cannot think of anything I can recommend given the lack of detail  supplied except to watch out if and when it happens again. Or ...   Saturday May 5th, 2007 06:06 am