According to Honeywell, the value reported for Room temp setpoint is not meaningful if the Heating is off. Comfort status has to report a number ...   Sunday Feb 15th, 2009 08:26 am

Hi Chiu Yes I have nighttime test working in other responses OK. What I had was this test repsonse though. If NightTime = 0 Then     Set NightTimeCtr = 0 Else     ...   Sunday Feb 15th, 2009 08:10 am

There are 2 events in the "Miscellaneous Events" section that can fire responses. At the time the Sunrise event fires can you confirm the value in ...   Saturday Feb 14th, 2009 07:15 pm

The flood of support has been enormouse......NOT!! I'm assuming then that the installers like to put their own sticker brands on thw windows rather than any Cytech ...   Saturday Feb 14th, 2009 06:16 pm

Maybe that's valid as long as you can make sure everything cabn report in the same temperature scale. The UCMs dont do that right now, but ...   Saturday Feb 14th, 2009 06:13 pm

OK I've re-run this "u" test with Beta 5.166 today and get the following: > SR01 < OK > u?11 < u?110A05B2 > SR01 < OK > u?12 < u?12000000 > SR01 < OK > u?13 < ...   Saturday Feb 14th, 2009 04:12 pm

Hi I'm trying to correct the problem with the 69 being set in the counter (counter 19) by Smartfit when the heating is off. My base offset ...   Saturday Feb 14th, 2009 03:49 pm

Tried this today and after a few frustrating false starts trying to get the firmware to upgrade (not the firmwares problem but something weird when ...   Saturday Feb 14th, 2009 02:09 pm

Any chance you can publish the "What's fixed" list for the 5.164 firmware too (even if you dont want to post it yet) so we ...   Saturday Feb 14th, 2009 09:08 am

Cool, I'm going to test this later today and let you know how I get on. J ...   Saturday Feb 14th, 2009 08:54 am

Another minor issue I noticed was that if you use the response wizard and add a "Comment" (under miscellaneous) then it's not saved with the rest ...   Saturday Feb 14th, 2009 07:42 am

One thing I noticed the other day in 2.9.13 was if you go into OPTIONS and change the checkboxes for which items you want to ...   Saturday Feb 14th, 2009 07:30 am

I'm probably going to kick myself when you reply but can you tell me what "Show Alarms" flag does as there's currently no help text ...   Saturday Feb 14th, 2009 07:19 am

Chaps, I'd just like to thank you for sharing the Comfigurator beta's with us mere mortals in the end user community and I for one have ...   Saturday Feb 14th, 2009 07:12 am

Is there a way to buy the RC01 in the UK as neither of your 2 distributers have it listed on their websites. If so how ...   Friday Feb 13th, 2009 09:59 am

Hi Are you able to share what the ETA is on this firmware? J ...   Friday Feb 13th, 2009 09:02 am

Actually, looking at Word and Excel they save in different ways: * Word flashes up a floppy disk icon in the status bar whilst saving * Excel ...   Thursday Feb 12th, 2009 09:26 am

Hi I accept your points as beeing normal windows behaviour and Ok see that when you write to comfort it uses the config in memory. I think ...   Thursday Feb 12th, 2009 08:53 am

Hi Philibo67 I have the same setup with you with Comfort II Ultra and BT home hub (mine is v1.5) and latest softphone and it all ...   Thursday Feb 12th, 2009 08:45 am

Apologies everyone, it does work.  I was looking at the feedback counter name which in my setup is similar to the response name.  :X ...   Thursday Feb 12th, 2009 08:38 am

From a usability standpoint could I also say (apart from the fact that overall 2.9.x is great!!) that one thing that does confuse me slightly ...   Thursday Feb 12th, 2009 06:39 am

Remember also that renaming a response doesnt update the references where it's used in Control Menu.  I reported this earlier and just confirmed it's still ...   Thursday Feb 12th, 2009 06:25 am

Any later betas of Configurator after 2.9.12 that we can play with yet? ...   Wednesday Feb 11th, 2009 01:51 pm

So presumably Comfort Bus Monitor would show me commands on the bus that set the counter values every x seconds,  but I'd expect here that ...   Wednesday Feb 11th, 2009 01:03 pm

Doesn't sound like a good idea then.  Perhaps i can find an amplified speaker out there. When you say speaker output do you mean from the ...   Wednesday Feb 11th, 2009 08:02 am

Hi, I wanted to add a couple of internal speakers at places in the house where keypad is not very audible.  I could add more keypads ...   Tuesday Feb 10th, 2009 05:37 pm

Here are some pictures of the solution I crafted around an SCS PCB. ...   Tuesday Feb 10th, 2009 03:11 pm

Nah, you can never have too much power.....:cool: ...   Tuesday Feb 10th, 2009 12:39 pm

The "Modules" tab in 2.9.12 is confusing me on a couple of fronts and i couldn't find any info in the online help. (1) For the ...   Tuesday Feb 10th, 2009 11:20 am

Given that Flags are presumably just a boolean "version" of Counters,  why it is that you cannot assign responses to them in Comfigurator as you ...   Tuesday Feb 10th, 2009 08:48 am

Hi I've been looking into this more and want to try and understand what is going on here. Re my point (1) below about the Room ...   Tuesday Feb 10th, 2009 08:30 am

Hi Being trying to check the versions of the 3 UCM's I have in my system. Assumed I could use u?11, u?12, u?13 respectively to do this ...   Tuesday Feb 10th, 2009 08:20 am

I've noticed an interesting feature with 2.9.12. When reading the event log it prompts you for a user code.  If you use the Engineer code here ...   Monday Feb 9th, 2009 02:01 pm

Thanks.  Sounds great.  I look forwards to having the opportunity to test this. Regards Julian ...   Monday Feb 9th, 2009 12:20 pm

Many thanks, that's really appreciated. I guess you have my address ok? Regards Julian     ...   Monday Feb 9th, 2009 12:18 pm

Hi, I have temperature monitored by a SCS and temperature monitored by the Smartfit UCM card. Smartfit stores it's temperature in a counter in Celcius. SCS stores it's ...   Sunday Feb 8th, 2009 12:35 pm

Hi, Upgraded to 5.178 and the SCS sensors now report correctly. Here's an example (provided for others as I didn't know what response to expect when I ...   Sunday Feb 8th, 2009 12:26 pm

Hi Is it possible to buy an addition UCM programming cable? As per other posts I leave mine connected to the main comfort CPU as it's under ...   Sunday Feb 8th, 2009 09:07 am

I'm a little confused by the release note for UCM 5.178 firmware. Most of it seems to refer to the same description as point (1) on firmware 5.174.  ...   Sunday Feb 8th, 2009 08:42 am

I read his comment as being that he wanted 4 programmable/custom keys that he could assign to responses, control menu options etc but I'd say ...   Saturday Feb 7th, 2009 02:26 pm