Hi I've installed AICO mains fire alarms with my Comfort System. They have an optional relay base which I used to connect to a Comfort zone. See: http://www.aico.co.uk/ Regards Julian     ...   Wednesday Oct 28th, 2009 09:06 pm

Thanks Chiu, It looks from your pictures that the new daughterboards are quite small and dont obstruct. In my experiences so far it's been the Ethenet module ...   Monday Oct 26th, 2009 07:20 am

Apologies Chiu I missed this. ...   Sunday Oct 25th, 2009 10:29 am

Hi Chiu, Upgraded to 5.200 and the counters and sensors are now reporting correctly...phew! The UCM scan in Comfigurator 3.1.3 still is incorrect but did work with ...   Sunday Oct 25th, 2009 09:28 am

OK, just flashed teh UCM05 to 5.200 and as you say the counters and sensors are now reporting correctly.  Phew....! The UCM still doesnt seem to ...   Sunday Oct 25th, 2009 09:25 am

You mention the UCM06 module,  is this a typo or are you bringing out a new UCM version too? Hopefully the PP2 jumper is moved to ...   Sunday Oct 25th, 2009 08:47 am

Thanks Chiu, I'll try it and report back. It would be good though if you could publish known errors like this on the forum as well ...   Sunday Oct 25th, 2009 08:36 am

Hi, Flashed my UCM's from 5.178 to 5.192 today. (1) C?xx and s?xx requests no longer send me reports back on the RS232 bus.  I only seem ...   Saturday Oct 24th, 2009 10:04 pm

Hi, I replaced the switch with a new one after some swapping around of existing switches.  The problem went away (ie not being able to switch OFF ...   Saturday Oct 24th, 2009 12:10 pm

Hi I expect Cytech will give you the definitive on this but I went through a similar upgrade path. I purchased a new UCM05 and swapped the ...   Friday Oct 23rd, 2009 06:00 pm

Hi Chiu, I've been gradually rolling out ZWave to my house over the last few months and using the latest Zwave firmware as you've released as ...   Wednesday Oct 21st, 2009 06:30 pm

Chiu, Are the seperate WAV's available too yet? Julian     ...   Wednesday Oct 21st, 2009 06:05 pm

Not really,  I've no idea what this section is for. Julian   ...   Sunday Oct 18th, 2009 06:59 pm

Hi Chiu, One final thought though.  The outgoing calls are dialing to our mobile phones.  What happens if this call is routed to voicemail,  is this a ...   Sunday Oct 18th, 2009 09:02 am

Hi Chiu, Thanks,  I'm being an idiot then as YES I was trying to end the call (#) via a local phone.  Now you've explained I ...   Sunday Oct 18th, 2009 08:54 am

Hi Chiu See attached. Regards Julian       ...   Sunday Oct 18th, 2009 08:51 am

Hi Chiu, The subject line probably says most of it but I am recently having problems when the  alarm goes off and it dials out. The ...   Saturday Oct 17th, 2009 08:12 pm

A few other usage observations with 3.1.3/Comfigurator: * When opening the application the tree is ALWAYS compressed.  This is a real pain to have to open each node.  ...   Saturday Oct 17th, 2009 09:26 am

Chui, Enhancement request.  When in "Modules" and scanning for UCM's would it be possible for the software to not overwrite the "Name" and "Type" fields if ...   Tuesday Oct 13th, 2009 05:55 pm

Hi Just looking at the release notes for the latest Ultra firmware 5.169 on the main Cytech download page and appears it is missing the features from 5.166 beta ...   Thursday Sep 24th, 2009 08:43 am

Hi Chiu That link seems to go to a web hosting site? Julian   ...   Wednesday Aug 12th, 2009 05:36 pm

Use Comfigurator 3 as it's already built into that and works over ethernet. J   ...   Saturday Jul 25th, 2009 03:42 pm

Hi all, Here you go at the following download link: <Link removed by JUWI_UK> For those upgrading you just need to overwrite your: (1) ComfortClient.exe (2) ComfortClient.chm On first start of ...   Monday Jul 13th, 2009 06:27 pm

Just a thought but is Comfigurator and the other application tests both using the same TCP port?  Could also explain why one works and one ...   Monday Jul 13th, 2009 04:38 am

All, I've changed the numbering system to allow me to record beta build numbers as the last "x" digits. This forum is for the next major release: ...   Saturday Jul 11th, 2009 03:43 pm

Percent Ramp ...   Tuesday Jun 30th, 2009 02:11 pm

Hey Clinton, How are you doing. The next big think I want to do is a service gateway that allows multiple connections from the client to Comfort.  ...   Thursday Jun 18th, 2009 10:24 am

Hi everyone, I've got no idea looking at the forum who is using, has used, is evaluating or toying with the ComfortClient. I'm putting a far mount of my ...   Tuesday Jun 16th, 2009 05:58 am

Hi MrTae Very spooky that you've just asked this question. My ComfortClient software will have sound in it in the next version which will be ready within ...   Tuesday Jun 16th, 2009 05:51 am

Dear all, I'm pleased to post 1.0.19.4.  The main reason is that Ingo noticed that some attributes could be lost when performing object locks and unlocks.  ...   Sunday Jun 14th, 2009 04:35 pm

Dear all, Here is build 1.0.19.3. Version 1.0.19.3 - (7 June 2009) Bug Fixes Improved trapping of duplicate entries in the Window Activity Tab Hover Logs when multiple objects ...   Sunday Jun 7th, 2009 07:56 pm

Hi all, It's nearly time to post the 1.0.19.3 build;  I am just doing final testing with the help of Ingo. Julian ...   Saturday Jun 6th, 2009 10:02 pm

Oh and I'd have thought that if you checksum this would also help with selected upload as you could skip ones where the checksums havent ...   Saturday Jun 6th, 2009 09:49 am

Chiu This has all come about because of my Client App and the whether to use R! or DA.  R! has got to be more performant ...   Saturday Jun 6th, 2009 09:46 am

It's the send seperate DA commands that is confusing me. Maybe that's OK for some scenarios but as it stands if I read the action code ...   Friday Jun 5th, 2009 08:04 am

OK So the {# of ID}'s  value itself doesn't include the extra escape characters. But if the {#of ID's} is 15 itself then it's 15,15 before the first ...   Friday Jun 5th, 2009 04:25 am

Hi, I have a question on  the "Escape" character 15. I assume this applies to ZWave ID's as with the dim value etc as both can take ...   Thursday Jun 4th, 2009 09:27 pm

Hi The documentation states the DA command can snd a maximum of 24 byte action code strings. Is there a way to send longer strings; ie ...   Thursday Jun 4th, 2009 06:18 am

Hey all Sorry about posting this so soon after the other one but I added a few new features which I think people were pushing for ...   Monday May 25th, 2009 03:19 pm

As I understand it,  performance both at design time in VS2008 and runtime incl better multicpu support. I bow to more experienced developer types here.  :) Maybe now ...   Monday May 25th, 2009 12:23 pm