Action 199 was implemented from Action 4.233 onwards
This is documented in the Action Codes Manual downloadable from
www.cytech.biz/manuals.html
If you have Comfort I Pro 4.22 (not 4.220) it should be have been built in 1998.!
The firmware I have is v4.222 (4.22 was a typo)
I want Comfort to announce when an event has happened such as \"Heater On\"
If I do not upgrade to 4.233, then it appears the only way i can do this is to record and play back a reminder message, when the event occurs.
Can you confirm?
Thanks
Yes you can use the action Play Reminder Message N on keypads/door stations triggered by any event
You record a reminder message 1 to 8 on the keypad or telephone - telephone in preffered for lower noise
I have firmware version 4.234 and cannot get action 199 to work either.
Any suggestions what may be the problem.
We gave determined that Action 199 (Say Words) does not work in Comfort I 4.234 or any Comfort I firmware. You need Comfort II for this action
I have a Fermax intercom on the gate and also at the front door. I have integrated this with 2 X DM01 interfaces. Now ever since I have had this installed I cannot get the volume right and I can hardly hear the caller on my mobile phone. The level is not too bad on the house phone and similar to that of the Fermax handset.
Are the adjustments I can make to get the Fermax intercom louder on my mobile? The Menu and answer phone level is fine over the mobile.
If I changed to DMO2 interfaces for the Fermax, is this going to improve anything?
Any thoughts on this greatly appreciated. Thanks Graham
We need to know what Comfort firmware you have, Comfort I or Comfort II, and what firmware versions
If Comfort II you should upgrade to the latest firmware currently 5.183, see
http://www.comfortforums.com/forum79/1784.html for download link and history
Also upgrade to the latest Comfigurator 3.1.9 and do a selective write of Tuning parameters to the system This should give good audio levels for the Intercom
Lets close this topic and start a new topic in the \"Problems and Troibleshooting\" forum at
http://www.comfortforums.com/forum36/ devoted to your question rather than adding to the end of this post which is not related, to do with how to dial out for door station