Comfort Automation/ Security System Forums

Use the Response Wizard to send commands to any Velbus Module.
In the Responses Menu, right click and select Add Response..

Enter the Description and Name of Response. The Add Action window opens

Append New Action. Select UCM. Velbus will be seen in the list of UCMs as shown
Velbus will only be seen if the Velbus UCM has been discovered in Scan for UCMs or the Velbus UCM has been added manually as shown in the previous topic

The drop down list for Velbus Types is shown
All the Velbus Module Types are shown in the list. Select the desired type

After selecting Module Type, select the action for the module type
Only the actions which are applicable to the selected Velbus module can be seen
Fpr example in the exampel shown, the Velbus 4 channel relay is selected. The actions for the relay module can be selected

Select the Channel if the module is a multichannel type

Select the Velbus Module ID which can be from 0 to 255.
Remember to select the ID which corresponds to the  velbus Module, as there is no check that the ID corresponds to the actual module type on the network