Comfort Automation/ Security System Forums

Guys,

I just received my brand new RIO module and found the current RIO manual to be a bit outdated. It references a couple of shunt/jumpers/switches etc. that doesn\'t exist on the RIO module.

I also see that the picture of the RIO module is also slightly incorrect, it shows a 12V and GND connection and if someone were to connect these to their respective terminals it would probably blow a fuse or something. The actual RIO module has 2 x 12V connections for external devices so please look at your PCB before you connect anything.

Regards
Ingo

Thanks for the feedback There are several manuals which need updating besides this. We will attempt to keep everything up to date as possible