Comfort Automation/ Security System Forums

Comfort Automation/ Security System Forums > Products > Door Stations > DS02 problem
Full Version: DS02 problem
You're currently viewing a stripped down version of our content. View the full version with proper formatting.

ident

04-04-2011, 09:02 PM
Post by Ruirego
Hi,

I have installed a DS02 doorstation connected to comfort with the DM02. The ringer, and door opening is working fine, but I can\'t communicate to the door station, there is no MIC or SPEAKER. 

Anything to be configured or maybe a cable problem? 

Rui Rego

ident

04-04-2011, 09:06 PM
Check the wiring according to the DM02 manual, download from https://www.cytech.biz/dm02_manual.html?category_id=108
There is a wiring diagram for DM02 to DS02

Also check that the Mic and speaker are connected to DP MIC and SPKR on Comfort, and not the KP MIC and SPKR

ruirego

04-06-2011, 01:02 AM
It\'s OK,

my mistake, I didn\'t connect the DM02 to the Comfort...

Ths,
RR

ident

04-06-2011, 07:14 AM
Thats normally the caseSmile

Guest

09-19-2012, 04:53 PM
How did you connect dm02 to comfort ? Using which wires ?
Comfort Automation/ Security System Forums > Products > Door Stations > DS02 problem