Comfort Automation/ Security System Forums

Hello to all Comfort customers, and installers

We are in the final stages of designing a new LCD Keypad model KP06, in the same family as the KT03.
This keypad is designed to be flush-mounted into a standard European 2 gang backbox. It will look similar to a KNX switch with a System 55 2-gang frame (ie 55 x 55 mm central cutouts). This means that any System 55 2-gang frame fromn any KNX manufacturer (eg Gira, Jung, Merten etc) can be used in place of the frame that comes with the KP06.
The KP06 can be mounted horizontally or vertically, as with the KT03
Volume control Up/down buttons instead of the thumbwheel on the KP04

We would like our customers feedback on several allternate designs of the frame before we start the production tooling.

[color=\"#aa0000\"]Pleave VOTE by clicking the VOTE button above[/color]


These alternate designs are shown. Note that the choice is between the different Frames only. Even though the keypad and LCD modules may look different, the final version of these have been determined


Design A




Design B



Design C


The ones in black will have IR receivers to allow RC01 and unitversal remote controls to control Comfort
The  Design A will not be able to receive IR signals, nor will third party frames

There is a poll to indicate your choice. Please participate by clicking on the VOTE button
However we cannot guarantee that the most popular design will be selected because there may be other factors to consider.

A photo of the actual Keypad module is shown


This is an impression of the KP06 in Vertical Orientation


If you do not find the KP06 frames to your liking, frames from KNX manufacturers like Jung, Gira, Merten etc can also be used, for example some of Gira\'s Esprit range  are shown (available in glass, Chrome, Aluminium etc)

Perhaps a beta program would assist you with real world feedback ?

Interesting suggestion, but the term Beta  is applicable to software changes.
Here there is no equivalent. We are looking for feedback as to what users prefer in the appearance design before we start the tooling and fix it

The KP06 will have upgradable firmware, which means the firmware can be upgraded by Comfort, unlike the KP04 and KP03, so if you buy the new KP06 you can upgrade the firmware when there are any changes

I hope you have indicated your preference.

B - black surround may not show dirt as easily as silver.

But I suggest the more prominently marked buttons of A, easier to see for those of us without our glasses when we need to turn off the alarm! Perhaps the characters could even be in black for maximum contrast?

Design A and B is nice

Design B first
Dedign c
Design a

Sorry, there was a problem with the poll, which prevented voting
It has been fixed. Please vote on the poll

Hi

I prefer the Black with IR.

PLEASE make a surface mount box available for this applications.

Kinda hard to start busting into a masonary wall for a flush mount.

 

Thanks 

 

I am afraid this would not look good as surface mount. It loses the look

Design A in the nicest but IR receivers is important factor.so my choose in Design B.