08-15-2011, 10:44 AM
08-15-2011, 11:54 AM
It is already possible to upgrade the system remotely via UCM/Ethernet and router configuration for port forwarding
You can upgrade the UCM/Ethernet by direct connection to PC or other modules by Comfort Bus
You can upgrade the UCM/Ethernet by direct connection to PC or other modules by Comfort Bus
08-15-2011, 12:52 PM
And pp2 !!!!
I would have thought that the whole point of the upgrade exercise was to eventually get to the point where you could upgrade the comfort system (in its entirety) remotely.
I would have thought that the whole point of the upgrade exercise was to eventually get to the point where you could upgrade the comfort system (in its entirety) remotely.
08-15-2011, 12:59 PM
PP2 is not needed as mentioned in the tutorial posts
I did say it would be possible to upgrade everything remotely from the Internet
I did say it would be possible to upgrade everything remotely from the Internet
03-23-2012, 04:41 PM
It should be noted however that opening up ports on the Internet is asking for trouble. All \"sensitive\" applications like the Comfort IP interface should be inside a seperate VLAN, accessible only via VPN. I\'m using this router for this purpose: Mikrotik RouterBoard RB750