Comfort Automation/ Security System Forums

5 November 2011

1. when initilaising modes on SIM set BUSY2 and turn on ERR LED for each of 3 messages
2. If setting options did not get an ACK reply from CBUS SIM, reset UCM/CBUS to handle remaiining problem with CBUS SIM getting into wrong mode after a few weeks reported by one user
3. If SW8 is shunted SIM will reinitialise immediately.
   
4. Improved error handling for Firmware upgrade by Bus.

Please download the cbf firmware file from https://www.cytech.biz/product_details.php?item_id=233
Please note that products may not have the latest firmware installled due to the supply chain. Please check the website for latest firmware https://www.cytech.biz/firmware.html

Hi
what does
If SW8 is shunted SIM will reinitialise immediately.
Mean?
which one?
the manual says don\'t use H
Mike

SW8-H is a testing feature. It re-initialises the CBUS SIm Module when it is shunted.

This was implemented because of a report of certain situations which cause the SIM to stop working until reset. If this happens this allows the SIM to re-initilaise
It should not be needed in normal siuatuons, and the latest firmware takes care of every known behaviour of the Cbus

Thanks For the quick and Complete reply
Mike