Comfort Automation/ Security System Forums

Full Version: KNX Physical Address Limits

You're currently viewing a stripped down version of our content. View the full version with proper formatting.

In the KNX Properties page, the physical address (also known as Individual Address) can be set to the following range of values;

KNX Area can be set to 0 to 15
KNX Line can be set to 0 to 15.
Physical Address can be set to 1 to 200. Values higher than 200 should not be entered as this will cause an error due to the firmware. Comfigurator 3.4.4 will prevent values > 200 from being entered

ident