11-07-2012, 03:17 AM
Disabled tamper Restore report upon reset. This causes users to receive keypad tamper restored sms (notifications) upon reset when there is no tamper.
Known Bugs
If a KP06 is installed at ID#1 and a 2nd KP06 is connected with the same ID without switching off the power, the ID of the 2nd KP06 cannot be changed using the * menu. The workaround is to reset Comfort. This applies to previous firmware
The latest KP06 Firmware can be downloaded from
https://www.cytech.biz/kp06_firmware.htm...ory_id=101
Known Bugs
If a KP06 is installed at ID#1 and a 2nd KP06 is connected with the same ID without switching off the power, the ID of the 2nd KP06 cannot be changed using the * menu. The workaround is to reset Comfort. This applies to previous firmware
The latest KP06 Firmware can be downloaded from
https://www.cytech.biz/kp06_firmware.htm...ory_id=101