Comfort Automation/ Security System Forums

Full Version: KP06 Firmware 6.004

You're currently viewing a stripped down version of our content. View the full version with proper formatting.

Need engineer code to access Setting menu so that users cannot accidentally change the ID and cause a communications Failure
\"Factory default\" option is incorporated into Setting menu. No longer triggered by holding * key for 6 secs.

The latest KP06 Firmware can be downloaded from
https://www.cytech.biz/kp06_firmware.htm...ory_id=101

Known Bugs

If a KP06 is installed at ID#1 and a 2nd KP06 is connected with the same ID without switching off the power, the ID of the 2nd KP06 cannot be changed using the * menu. The workaround is to reset Comfort. This applies to previous firmware