Comfort Automation/ Security System Forums

Odd one we\'ve not had before: a neighbour called this morning to say the strobes on our bell boxes were flashing. They were. But there had been no alarm that we were aware of.

I have strobe active in alarms: Intruder, ArmFail, Panic, Tamper, Fire, Gas and FamilyCare (Gas and FamilyCare actually unused). There are none of those alarms listed in the log, just the routine Mode Changes and Sign Ins.

The only time our strobes have been on previously, has been after an Intruder / Arm Failure.

Can strobes be triggered by anything else in Comfort?

Henley

There is a strobe action that can tun on the strobe. Other than that only alarms can do it

See if it happens again