Comfort Automation/ Security System Forums

There is an errror on the post
http://www.comfortforums.com/forum16/3667.html

The image is missing and the post cannot be edited


The double EOL connection can be found in the Installation manual figure 2.11 as shown below

This shows how to connect the alarm and tamper contacts with 2 EOL resistors

Thank you for your reply. I need to know how to apply these resistors to the 6 connections that I have available on the PIR, which are as follows:
-
+
NC
NC
T
T

Thanks again
Avney

The connections for the 2 resistors is shown in the jpg diagram
If you cannot see the jpg, you have to download the attachment

4K7 is connected between the two NC

2K7 is connected from NC to T in series

Or wait for wiredhome diagram in http://www.comfortforums.com/view_topic.php?id=3667&forum_id=16&jump_to=16138#p16138

Siamak has the right connection more clearly shown in http://www.comfortforums.com/forum16/3667.html

For some reason I cannot see any  button to reply to that topic