HI,please can be any one help me how can control to any thing (( lighting , air condition,camera,..... by1- calling2-sms
please i need example and picture for how using programmed Comfigurator by GSM
Regards
Hasan
You can see pictures of how to send SMS to control Comfort in
http://www.comfortforums.com/forum48/3647.html
First you have to program Comfort Control Menu to control the lights, aircon, blinds and other things
You can then send the the numbers to Comfort to control the devices
(1) for security
(4) for control
will reply with the help instructions
First you need to learn to program Comfort to control the equipment. The manual Programming with Comfigurator can be downloaded from
https://www.cytech.biz/programming_with_...ory_id=106
Then you need to prigram the GSM by reading the manual which can be downloaded from
https://www.cytech.biz/product_details.php?item_id=205
The whole process is not something that can be shown easily with a few pictures
Have you bought a Comfort EV003 Training Rig or some Comfort products and UCM/GSM4, and have you been able to attend any training, as this will make it easier for you to start
You can also send an email to support@cytech.biz with your details so we can see how to assist
Hi,thank you for Replayplease cannot find sms in program Comfigurator 3.8.10.0 see picture
Regards
If you need to send SMS to the phone, the phone type must be SMS, not Voice
But both SMS and Voice Phones can send SMS to Comfort
However what you show is just the phone numbers, you have not programmed the Control menu at all
Please read up on the Programming By Comfigurator manual as it is not possible to explain in a few lines
Hi,
I mean after programmed the no.of tel. in menu no see word sms ,please see picture above
Regards
You need to have the UCM/GSM installed in the system in order to send and receive SMS
If the UCM/GSM is not installled there will not be an option for SMS in Phone Types