Comfort Automation/ Security System Forums

Hi

Whenever i execute this response from comfigurator the program abruptly close!

The response is working when it is running on composer. There are a few response the same but using differant Preset messages and linking to differant responses and they are shutting it down as well. I Have just updated to Comfigurator v2.2.1 bit it was doing it before that.

If Input LSM <> 0 Then
    If Flag Flag01 = 0 Then
        Dynalite LinearPreset 2 30 0 0 255
        Do Dininggardanoff [Outside Formal Dining Off] After 180 Seconds Using Timer03    (it is line in the program)    
    End If
    If Flag Flag04 = 0 Then
        If  SecurityMode = AwayMode Then
            Do MBedLghtsOn [Master Bed lights On] After 20 Seconds Using Timer18
            Do MbedLightsOff [Master bed lights off] After 300 Seconds Using Timer13
        End If
        If  SecurityMode = VacationMode Then
            Do MBedLghtsOn [Master Bed lights On] After 20 Seconds Using Timer18
            Do MbedLightsOff [Master bed lights off] After 300 Seconds Using Timer13
        End If
    End If
End If

Thanks

Can you send your complete ccl file to support@cytech.biz so we can duplicate it?
Have you tried this using 2.2.1

I Have tried it on V2.2.1 and it still does it! Will email it Promptly.

Thanks

In Configuration, Use Branch Actions is not checked. If you have Comfort II, can you try checking this box and see if the same problem occurs?

This has been traced to Comfigurator handling of long Responses, and will be fixed in the next release. Thanks for your feedback

Thanks. I take it it is only a comfigurator issues and won\'t affect the operation of the alarm?

Just a Comfigurator problem, dont worry