+- Comfort Automation/ Security System Forums (https://www.comfortforums.com)
+-- Forum: These Forums (https://www.comfortforums.com/forum-1.html)
+--- Forum: NEWS & Announcements (https://www.comfortforums.com/forum-25.html)
+--- Thread: Announcing KT03 Touchscreen Keypad (/thread-1958.html)
Pages:
1
2
- slychiu - 08-15-2010
Cytech have great pleasure in announcing our new KT03 monochrome touchscreen keypad to be available in the next few months.
This replaces the old KT01 but at a lower cost and better performance. The KT03 has a 4 inch (10 cm) monochrome touchscreen LCD, with built in speaker, microphone, and Infrared receiver. This is positioned as a keypad replacement, to be installed in place or in addition to a regular keypad, and not an expensive large screen colour touchscreen used in lighting or audio-visual systems.
Please visit the new forum dedicated to the KT03 at http://www.comfortforums.com/forum90/2002.html
- palmlodge - 08-20-2010
Does this keypad support the disabling of the annoying button beeps on a KP0x ? On the KP03 this can only be achieved by having the volume control down to zero, but then you don\'t hear alerts.
And also, would this be suitable to replace a KP03 and a CBUS DLT that are next to each other ?
- slychiu - 08-21-2010
Yes it can replace a KP03 and a DLT, it depends on what you use the DLT to show
The annoying button beeps you mean the confirmation that you have pressed a button? No it is not advisable to remove that on a touchscreen as the feel is not as positive as a rubber keypad.
- garym999 - 08-22-2010
Looks great and finaly something to place it above the look of a normal alarm system and represet the value invested in the rest of it.
I like it horizontal.
Do we have a rough retail guide price?
Good work
- slychiu - 08-23-2010
Thanks, the retail price in the UK will probably be around ã310
- Dils - 09-30-2010
Hi
Can you please tell me how this is wired, does it need power.
I am about to get the walls replastered so it will be good to get the wires in place.
- Billan - 09-30-2010
The wiring is the same as a keypad. One shielded UTP.
- koutsogiannis - 09-30-2010
What we need to figure out , however, is the box . Have room for flush-mounted !
- slychiu - 09-30-2010
Yes, there is a flush mount back box supplied with every KT03. The one shown at London Training has the back box. I think you may have seen it
- palmlodge - 10-03-2010
What is used to program the screens ? Will there be many samples included - especially for CBUS ?