New System Configuration - Printable Version +- Comfort Automation/ Security System Forums (https://www.comfortforums.com) +-- Forum: Products (https://www.comfortforums.com/forum-3.html) +--- Forum: Questions on Using Comfort (https://www.comfortforums.com/forum-159.html) +--- Thread: New System Configuration (/thread-1133.html)

- EOTB - 08-03-2008 Having never installed a Comfort System before, would it be OK for you guys to just go over my shopping list, just incase there is any drastic errors in the design. Brief background: Have 3 storey house Centralizing system on each floor with Slave unit Including Fire detectors. Utilzing basic lighting control with Comfort modules Shopping List 1x CP9000-ULT/EN03 2x SEP01/M2/EN03 3x LEM02-M2 (To connect to SEP and main CPU) 1x UCM05 1x TPB01 1x RGR04 3x TWS02 * 3x Batteries 3x KP03E (For each floor) 1x DP03 1x DP03_Hood 7x PIRs 4x Mag Contacts 2x ROR Fire Sensor (12v) 10x Optical/Heat Sensors (12v) 3x 16R - 8 Pack (2k7 & 4k7) Zone Resistors CAT5e UTP or STP Cable (depending on audio tests) 6core Alarm Cable 3x Internal Sounders (for each floor) * I will be installing one TWS02 into each SEP and main CPU enclosures to control 2 lights on each floor. I have already rewired the house and centralized the lighting cables to a single location (eg cables to each light switch and light bulb). For the boards I am installing with the main and slaves, will there be enough room in the provided enclosures? Thanks for your help Adam. - slychiu - 08-03-2008 Your equipment list should be sufficient for the configuration The TWS modules is normally mounted in a separate enclosure from the low voltage Comfort modules so that there is sufficient separation. Other than that the space should be sufficient. - EOTB - 08-03-2008 Thanks for the info.