+- Comfort Automation/ Security System Forums (https://www.comfortforums.com)
+-- Forum: Support (https://www.comfortforums.com/forum-2.html)
+--- Forum: Problems & Troubleshooting (https://www.comfortforums.com/forum-36.html)
+---- Forum: Vocabulary Issues (https://www.comfortforums.com/forum-76.html)
+---- Thread: Missing numbers on menu (/thread-1168.html)
- Podro - 09-14-2008
Hi,
I have had a comms problem with my door station which I think I have isolated now to some water damaged tracks on the PCB so it will have to be replaced. Whilst messing around with the door station I have inadvertently lost all the announced numbers on the menu system over the internal keypads.
For example all it says now is \"Press [gap] to arm security system, [gap] for messsages...\" and so on.
Any ideas what I have done?
I have reloaded the comfigurator file and reset the system to no avail.
Thanks,
Paul.
- slychiu - 09-15-2008
It appears that the voice may have been corrupted
You need to reload the Vocabulary using the UCM05 and Comfigurator
First upgrade to the latest version of Comfigurator 2.2.3
I assume you have Comfort II, not Comfort I
Start with a Sentence Table Download as the sentences may be corrupt not the whole vocabulary
Then do Transfer > Sentence Table Download
Select kate28.bin You can find kate28.bin from https://www.cytech.biz/Default.aspx?cmd=sQ0OYE9X66w%2b0P%2bAcFsmAI3j73Rwtfrj&fileid=176&dcid=1&pageindex=
When this completes, reset Comfort
If the menu is OK then fine. If not then do a Vocabulary Download
Transfer > Vocabulary Download and select the same kate28.bin
This takes 20 minutes. Reset after
- Podro - 09-15-2008
Thanks. I will give that a go.
- Podro - 09-28-2008
Hi,
I did the sentence table download and the menu had corrected itself now saying every number but the display on the keypad showed \"WRONG TEXT PRESS *1 TO SYN\" so I did the full vocab download and it is still the same.
If I press *1 it doesn\'t do anything.
The vocal menu is fine but the LCD screen on the keypad displays the WRONG TEXT message no matter what I do.
Any suggestions...?
Thanks,
Paul.
- slychiu - 09-28-2008
The message Press *1 to sync means you must press BOTh * and 1 together, not * followed by 1
- Podro - 09-28-2008
That works - Thank you!