Local phone not detecting line seize. - Printable Version +- Comfort Automation/ Security System Forums (https://www.comfortforums.com) +-- Forum: Products (https://www.comfortforums.com/forum-3.html) +--- Forum: Door Stations (https://www.comfortforums.com/forum-86.html) +---- Forum: Door Station Problems (https://www.comfortforums.com/forum-130.html) +---- Thread: Local phone not detecting line seize. (/thread-1675.html)

- Ingo - 11-22-2009 Hi, I just got around to connect my DS01 and RGR04 module to my Ultra II test system. I\'ve got a phone connected to TEL_OUT and when I press the DS button the phone starts ringing as per normal. When I lift the handset then I can still hear the ringer trying to \'phone\' and there is no comms between the phone and the DS. What I think is happening is that Comfort doesn\'t detect that I lifted the handset. I even tried a different phone but with the same result. I am running older firmware, 5.079. Thanks, Ingo - slychiu - 11-22-2009 I suspect that you have enabled \"Ignore Line Cut\" in Modules and Settings > Configuration Flags. If you do this (because you have no telephone line connected) Comfort is not able to detect offhook - Ingo - 11-22-2009 Thanks Chiu, it works great now.