+- Comfort Automation/ Security System Forums (https://www.comfortforums.com)
+-- Forum: Products (https://www.comfortforums.com/forum-3.html)
+--- Forum: Door Stations (https://www.comfortforums.com/forum-86.html)
+---- Forum: Door Station Problems (https://www.comfortforums.com/forum-130.html)
+---- Thread: Tuning Paramaters (/thread-3214.html)
- waynebr - 12-29-2012
Hi is there a manual anywhere that describes what each of the tuning paramters do?
I have looked in the help section in Comfigurator but it does not say much.
I want to adjust the volume of the beep on the doorstation, adjust the volume of messages on doorstation. I also need to adjust the volume to the internal phones and also for voice to the doorstation. Are you able to advise which ones I need to adjust.
Thanks
- ident - 12-30-2012
The Tuning Parameters Guide can be downloaded from https://www.cytech.biz/tuning_parameters_guide.html?category_id=99
- waynebr - 12-30-2012
Thanks, how did I miss that I did look around the downloads trying to find it
- ident - 12-30-2012
You can find it under Downloads > technical info
- waynebr - 12-30-2012
Thanks I got the levels for line in and line out but the reminder messages seem to be independent. Can you tell me which paramaters adjust the volume of the reminder playbacks on the door phone.
Thanks
- ident - 12-31-2012
The schematic on page 12 is the most useful in understanding the effect of the gains of various stages
The reminder messages are already recorded in the Voice Processor and is played on keypad or door station according to the action code
In this case the effective gains are the keypad voice level and AFE Out KP/DP (parameter 77). However any change will affect the keypad as well as door station announcements as there is no separate parameter to adjust keypad separately from door station
- waynebr - 12-31-2012
Thanks