Comfort Automation/ Security System Forums
KT03 Firmware 7.012 to 7.015 - Printable Version

+- Comfort Automation/ Security System Forums (https://www.comfortforums.com)
+-- Forum: Products (https://www.comfortforums.com/forum-3.html)
+--- Forum: KT03 Touchscreen Keypad (OBSOLETE) (https://www.comfortforums.com/forum-90.html)
+---- Forum: KT03 Firmware History (https://www.comfortforums.com/forum-104.html)
+---- Thread: KT03 Firmware 7.012 to 7.015 (/thread-3295.html)

- ident - 02-22-2013

KT03 7.012 (Beta) firmware can be downloaded from https://www.cytech.biz/product_details.php?item_id=266

Changes in this version include
  1. KT03 will detect if it is not polled or if there is a clash in IDs (Duplicate IDs) and display a message, and also allow the ID to be changed in Settings without needing to enter the user code
  2. Calibration accuracy has been improved
  3. Implement new ID setting method by Comfigurator
  4. ID of FF means ID is unassigned.
  5. Fixed Rectangular Border Misalignment near the right edge of the screen
  6. Settings page Keypad size of buttons has been enlarged to match the default keypad page buttons
  7. Improved Firmware upgrade reliability and faster time to erase Flash.
  8. Firmware Upgrade by UCM through Comfort Bus has been implemented (as well as through KT03 USB Port)
  9. Write to Comfort by Bus has been implemented (as well as through KT03 USB Port)
Known Issues
  1. ID of 8 is invalid. When reset the ID will revert to FF (Unassigned)
  2. When Trouble alarm is restored, the OFF LED will turn off instead of steady ON
  3. When Alert or Alarm state occurs, the AC LED flashes instead of the ARM LED


- ident - 03-02-2013

Bug found in 7.012
  1. ID of 8 is invalid. When reset the ID will revert to FF (Unassigned)
  2. When Trouble alarm is restored, the OFF LED will turn off instead of steady ON
  3. When Alert or Alarm state occurs, the AC LED flashes instead of the ARM LED
Please use IDs 1 to 7 only  until firmware is upgraded


- slychiu - 03-21-2013

KT 7.013 Firmware Changes

  1. Fixed BUG - If KT03 ID set to 8, the ID will become FF (Unassigned) on reset of KT03
KT03 7.014 Firmware Changes
  1. Fixed BUG when Trouble alarm is cleared the OFF LED stops flashing but turns off, instead of reaming steady on
  2. Fixed BUG when there is Alarm or Alert state, the AC LED flashes instead of the ARM LED