+- Comfort Automation/ Security System Forums (https://www.comfortforums.com)
+-- Forum: Support (https://www.comfortforums.com/forum-2.html)
+--- Forum: Comfort as Fire Alarm (https://www.comfortforums.com/forum-115.html)
+--- Thread: motion sensor , gas sensor ,... (/thread-4039.html)
- hasan hadi - 11-11-2014
Hi,
I need website or any company buy motion sensor matching with comfort system also gas sensor , magnetic sensor ,.....
Regards
- slychiu - 11-12-2014
Any PIR, smoke, gas, heat detector operating on 12V designed for burglar alarm systems will work with Comfort.
For fire/smoke, do not use 2 wires sensors. 4 wires 12V sensors are needed
You should be able to find many manufacturers or distributors
Hunters have s good selection from various manufacturers http://www.hunters-wholesalers.co.uk/
- hasan hadi - 11-12-2014
[user=1]slychiu[/user] wrote:
Quote:Any PIR, smoke, gas, heat detector operating on 12V designed for burglar alarm systems will work with Comfort.
For fire/smoke, do not use 2 wires sensors. 4 wires 12V sensors are needed
You should be able to find many manufacturers or distributors
Hunters have s good selection from various manufacturers http://www.hunters-wholesalers.co.uk/
Hi,I have equation about all sensor or zone input
this zone need dry input I mean PIR sensor assume work 12vdc but out not dry i mean output is voltage this voltage is acceptable for comfort system or not or must be inside PIR sensor relay and output relay connected to zones
please this important before buy any sensor
Regards
- slychiu - 11-12-2014
PIR and all sensor must be dry contact not 12V output
Sensors made for alarm ysytems are all dry contact