![]() |
|
Internal sounder - Printable Version +- Comfort Automation/ Security System Forums (https://www.comfortforums.com) +-- Forum: Support (https://www.comfortforums.com/forum-2.html) +--- Forum: Questions on Installation and Connection (https://www.comfortforums.com/forum-123.html) +--- Thread: Internal sounder (/thread-4350.html) |
- strickers - 11-01-2015 Hi, I have an internal sounder to wire in. Can I please just confirm the connections before I commence. The connections is has are- R- Negative siren trigger. Apply 0V to activate sounder M- Negative low volume siren trigger. (keypad) 0v to activate ST- Negative strobe trigger. Apply 0v to activate strobe H+ Permanent positive hold off supply, 12vdc nominal H- permanent negative hold off supply RTN Negative tamper return Would I be correct with. R- This would go to the output connection ST- Rather than use the comfort strobe connection (as this is already used with an external sounder) could I jumper across to R- so both the sounder and strobe activate together? H+ just to the comfort 12v supply (not the 12v on the output) H- to comfort negative. Is this OK or would I better connecting it straight to bell and strobe outputs. http://www.elmdene.co.uk/files/ins/int500s-00.pdf Also the instructions state I need to pass through a ferrite sleeve before connecting. Is this needed with comfort? Thanks. - slychiu - 11-01-2015 From what I see, this internal siren is for the same purpose as an external siren exceot that it is not suitable for outdoors, so the connections should be the same as an external sirem ie your connections are correct except that R- should go to SRN- (siren negative trigger output) Strobe can go to STR- The strobe output remains on after the alarm times out if the system is not disarmed so it provides visual confirmation that an alarm has occured even when the siren has timed out Not sure if I understand the correct purpose of this internal siren. It will be loud - strickers - 11-01-2015 Hi Slychiu, So my standard siren output will cope with the external and this internal connections at the same time? The internal sounder should make it uncomfortable for any intruder. Thanks. - slychiu - 11-02-2015 Yes with a backup battery. The battery provides extra current if needed, since the Bells are on for 5 minutes by default |