Comfort Automation/ Security System Forums
Releases (Latest at top) - Printable Version

+- Comfort Automation/ Security System Forums (https://www.comfortforums.com)
+-- Forum: Third Party (interfacing to Comfort) (https://www.comfortforums.com/forum-5.html)
+--- Forum: alphaWerk UHAI RPi (Community Edition) (https://www.comfortforums.com/forum-136.html)
+--- Thread: Releases (Latest at top) (/thread-4618.html)

- mattbrain - 02-01-2017

Release 1.0.1a

This is the latest release

Download disk image here 1.0.1a.img.zip existing users may upgrade using the Upgrade button in the Web GUI

Supported Devices
  • Samsung SmartThings
    • Inputs, Outputs, Flags, Counters, Alarm Mode and State, Responses, Doorbell.

Changes
  • Fixed: alarm.config.template no contains windows LF and can be easily edited on Windows machine. Existing users may download a good alarm.config.template file from here: alarm.config.template
  • Fixed: Alarm Mode change to mode without a SirenName entry in .cclx causes restart of service
  • Fixed: Changed update process to get update file synchronously. Previous updates may fail if file is not downloaded fully before starting update.
  • Fixed: Registration with send usage data flag now correctly registers
  • Enhancement: Add link to release notes on Web GUI
  • Enhancement: Add link to Forum and Mailing list on Web GUI
  • Enhancement: Updated ComfortAlarm Zone Device now includes Capability.ContactSensor allowing it to report Open/Closed as well as Motion/No Motion
Known Issues
  • Discovery is limited to around 130 devices depending on length of device names. Please contact support if you have more devices for process to discover many devices
Notes
  • You will need to update the ComfortAlarm Control device from the SmartThings page in the Web GUI in order for the Doorbell device to function properly.
  • You will need to update the ComfortAlarm Zone device from the SmartThings page in the Web GUI in order for the Zone device to report Open/Closed

- mattbrain - 02-07-2017

Release 1.0.0a
Download here 1.0.0a.zip

Supported Devices
  • Samsung SmartThings
    • Inputs, Outputs, Flags, Counters, Alarm Mode and State, Responses.
Known Issues
  • Door Station Bell Button push will cause a restart of the UPNP manager; impact will be loss of communications between Comfort and UHAI devices for up-to 10 minutes.
  • Requesting a stop of the UPNP manager via the web GUI when it isn\'t running will result in an error message. Service availability is not affected.
  • Registering with \'send usage data\' checked will not complete. Service availability is not affected, uncheck the \'send usage data\' checkbox to complete registration.


- mattbrain - 02-14-2017

Release 1.0.0c

Download disk image here 1.0.0c.img.zip, existing users may upgrade using the Upgrade button in the Web GUISupported Devices
  • Samsung SmartThings
    • Inputs, Outputs, Flags, Counters, Alarm Mode and State, Responses, Doorbell.
Changes
  • Fixed: Doorstation doorbell press event no longer causes restart of service
  • Fixed: Start, Stop, Restart on the web GUI only available when the service is in the appropriate state
Known Issues
  • Registering with \'send usage data\' checked will not complete. Service availability is not affected, uncheck the \'send usage data\' checkbox to complete registration.
Notes
  • You will need to update the ComfortAlarm Control device from the SmartThings page in the Web GUI in order for the Doorbell device to function properly.