+- Comfort Automation/ Security System Forums (https://www.comfortforums.com)
+-- Forum: Products (https://www.comfortforums.com/forum-3.html)
+--- Forum: Relay/Automation Modules (https://www.comfortforums.com/forum-118.html)
+--- Thread: OP04 Output Submodule with 4 Relays (/thread-5124.html)
- slychiu - 11-14-2019
OP04 is an Output Submodule with 4 Relays which plugs in to CM9001 in place of OP01 (with 8 open-collector Outputs).
This connects 4 relays direct to Outputs 1 to 4 of CM9001. Outputs 5 to 8 are not available when OP04 is plugged in
- Swiss-Toni - 11-20-2019
With the OPO1 if the board goes you would just replace the board, if this goes you have to replace the board or is that a resetable fuse set into it, also what what is the voltage max capacity.
- slychiu - 11-21-2019
If this fails you also replace the submodule just line OP03 and OP01
It is less likely to fail than OP03 or OP01 because the relays have 5000V isolation/breakdown volatge.
In OP01 and OP03 the outputs are open collector transistor outputs and are more easily damaged